[OpenWrt-Devel] [PATCH] ath79: add support for gl-ar750
devel-sven at geroedel.de
Thu Jun 27 18:32:05 EDT 2019
Am Mittwoch, 26. Juni 2019, 12:02:23 CEST schrieb Luochongjun:
> This patch supports gl-ar750, which was previously supported by ar71xx.
> - SOC: QCA9531 (650MHz)
> - Flash: 16 MiB (W25Q128FVSG)
> - RAM: 128 MiB DDR2
> - Ethernet: 10/100: 2xLAN + 10/100: 1xWAN
> - Wireless: 2.4GHz (bgn) and 5GHz (ac)
> - USB: 1x USB 2.0 port
> - Switch: 1x switch
> - Button: 1x reset button
> - LED: 3x LEDS (white)
> Flash instruction:
> Support for sysupgrade directive upgrades, as well as luci upgrades.
Thanks for porting this device. Based on your previous patch I built an image
and flashed it.
Two thing to mention:
* probalby you can add a line "SUPPORTED_DEVICES += gl-ar750" to the Makefile,
to make sysupgrade accept the image without "-F" switch on ar71xx
* the device has "printed MAC-address from case" + 1 for the LAN-ports. Not
sure what is used with vendor FW.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel