[OpenWrt-Devel] ath10k-ct 4.19 and IBSS
Ben Greear
greearb at candelatech.com
Tue Jun 25 09:54:28 EDT 2019
On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
>
> On 24.06.19 22:04, Ben Greear wrote:
>> On 6/24/19 8:32 AM, Koen Vandeputte wrote:
>>> Hi Ben,
>>> Hi All,
>>>
>>> So I'm going to give this another try ..
>>> As the IBSS functionality is heavily advertised as a delta to mainline, it would be very nice to get it working also :)
>>>
>>> Testing the latest ath10k-ct driver and firmware seems to be a step back compared to roughly a month ago.
>>>
>>> I'm currently seeing the firmware crashing, which was not the case before:
>>>
>>>
>>> ath10k-ct + htt-fw:
>>>
>>> https://pastebin.com/raw/7Sy9yx6s
>>
>> Looks like firmware ran out of some WMI event buffers and crashed instead of handling
>> it more gracefully.
>>
>> Please try the attached (untested) firmware and see if it behaves better.
>>
> Hi Ben,
>
> 1 step forward here.
>
> I'm not seeing crashes anymore using the test-firmware.
>
> https://pastebin.com/raw/4ZeXu7iw
>
>
> I've linked up 2 IBSS devices (wave 1, VHT80)
>
> OLSR traffic (UDP) works and packets here are nicely going back & forth.
>
> Simply pinging (ICMP) between the 2 devices does not work.
>
> When sending 100 pings, (64 byte large) sometimes 1 gets through .. but with a latency of > 500ms
>
>
> I think if the splat and the beacon spam below could be fixed .. this would be a major step forward:
>
> [ 30.328423] ------------[ cut here ]------------
> [ 30.333251] WARNING: CPU: 0 PID: 1578 at /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-05-08-f98b6dc4/ath10k-4.19/mac.c:6563 ath10k_mac_vif_beacon_free+0xc7c/0x115c [ath10k_core]
> [ 30.355636] Modules linked in: mbt ath9k ath9k_common qcserial pppoe ppp_async option cdc_mbim ath9k_hw ath10k_pci ath10k_core ath usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables huawei_cdc_ncm ftdi_sio cfg80211 cdc_subset cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limt
> [ 30.427331] nls_utf8 nls_iso8859_1 nls_cp437 authenc ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common ptp pps_core mii aead crypto_null cryptomgr crc32c_generic crypto_hash
> [ 30.448017] CPU: 0 PID: 1578 Comm: wpa_supplicant Not tainted 4.14.129 #0
Please look in your code and let me know the source around the line in mac.c (6563) that is splatting.
Also, you might grab the latest ath10k-ct repo, it has a tweak that might fix the SWBA overrun
messages.
https://github.com/greearb/ath10k-ct
Thanks,
Ben
> [ 30.454906] Stack : 80500000 804c0870 00000000 00000000 80495404 86fc5a24 8606485c 804e7307
> [ 30.463402] 804915c8 0000062a 805437d0 000019a3 87d1ed28 00000001 86fc59d8 ebb059e8
> [ 30.471880] 00000000 00000000 80540000 000068e8 00000000 00000000 00000007 00000000
> [ 30.480373] 00000123 f55b2536 00000122 00000000 80000000 00000000 87152504 8710ccc4
> [ 30.488863] 00000009 000019a3 87d1ed28 876fd000 00000000 802a3964 00000000 80540000
> [ 30.497355] ...
> [ 30.499839] Call Trace:
> [ 30.502320] [<8006c7ac>] show_stack+0x58/0x100
> [ 30.506838] [<80086de0>] __warn+0xe4/0x118
> [ 30.510994] [<80086ea4>] warn_slowpath_null+0x1c/0x28
> [ 30.516158] [<8710ccc4>] ath10k_mac_vif_beacon_free+0xc7c/0x115c [ath10k_core]
> [ 30.523505] ---[ end trace 83fd3571e310245a ]---
> [ 33.172852] wlan0: Trigger new scan to find an IBSS to join
> [ 33.237416] wlan0: Trigger new scan to find an IBSS to join
> [ 33.243317] wlan0: Trigger new scan to find an IBSS to join
> [ 33.249205] wlan0: Trigger new scan to find an IBSS to join
> [ 33.305210] wlan0: Trigger new scan to find an IBSS to join
> [ 34.049614] wlan0: Trigger new scan to find an IBSS to join
> [ 34.115369] wlan0: Trigger new scan to find an IBSS to join
> [ 34.189823] wlan0: Selected IBSS BSSID fa:77:78:55:af:7b based on configured SSID
> [ 34.280540] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.288002] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.295924] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.303406] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.310839] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.318280] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.325714] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.333148] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.340567] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> [ 34.348003] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
> ...
> ...
>
> Thanks for your swift reply so far and the test-firmware.
>
> Regards,
>
> Koen
>
>>
>>> ath10k-ct + non-htt-fw:
>>>
>>> https://pastebin.com/raw/bqVqQmXq
>>>
>>>
>>> Mixing upstream ath10k driver with the non-htt CT fw does not work.
>>>
>>> Errors are seen here regarding missing IE's and stuff.
>>> Also IBSS functionality is not shown when running 'iw list'
>>
>> IBSS requires ct driver plus ct firmware, at least.
>
> Ah, ok. :-)
>
> Thought it was possible based on this one :
>
> https://www.spinics.net/lists/linux-wireless/msg137827.html
>
>
>>
>> I'd expect the regular driver to work in normal STA/AP mode, though it would likely
>> warn about IEs. Should be warning only though.
>>
>> Thanks,
>> Ben
>>
>>>
>>>
>>> Kind Regards,
>>>
>>> Koen
>>>
>>
>>
>
--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list