[OpenWrt-Devel] [PATCH] ath79: Remove redundant LED GPIO definitions for Archer C25 v1

[Adrian Schmutzler]

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>

---

Run-tested!
---
 target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
index 3c971b5464..881e3a1822 100644
--- a/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
@@ -24,10 +24,6 @@
 		cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		/* can be removed on 4.19 */
-		gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>;
-
 		led_gpio: led_gpio at 0 {
 			compatible = "fairchild,74hc595";
 			reg = <0>;
-- 
2.11.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel