[OpenWrt-Devel] [PATCH 1/1] ipq40xx: Linksys: sysupgrade: Ensure OEM volumes are removed

Christian Lamparter chunkeey at gmail.com
Sun Jun 16 07:49:11 EDT 2019


On Saturday, June 15, 2019 11:40:56 PM CEST Jeff Kletsky wrote:
> From: Jeff Kletsky <git-commits at allycomm.com>
> 
> When OEM volumes are present in the [alt_]firmware partition,
> sysupgrade will write a new kernel, but will fail to write
> the root file system. The next boot will hang indefinitely
> 
>     Waiting for root device /dev/ubiblock0_0...
> 
> Modified ipq40xx/base-files/lib/upgrade/linksys.sh
> to remove both `squashfs` and `ubifs` if found
> on the target firmware partition's UBI device.
> 
> Run-tested-on: Linksys EA8300
> 
> Signed-off-by: Jeff Kletsky <git-commits at allycomm.com>

Can you check if this is still working? Or if I broke it
when I was implementing the shellcheck changes?

https://git.openwrt.org/?p=openwrt/staging/chunkeey.git;a=commit;h=003c63f7b1102702fb4a0580683b21ded1ee1a3e

Cheers,
Christian

> ---
>  .../ipq40xx/base-files/lib/upgrade/linksys.sh | 22 +++++++++++--------
>  1 file changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh b/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
> index b8e6dd7352..a6cf5d8de9 100755
> --- a/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
> +++ b/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
> @@ -1,3 +1,5 @@
> +#!/bin/sh
> +
>  linksys_get_target_firmware() {
>  
>  	local cur_boot_part mtd_ubi0
> @@ -53,8 +55,12 @@ linksys_get_root_magic() {
>  }
>  
>  platform_do_upgrade_linksys() {
> +
>  	local magic_long="$(get_magic_long "$1")"
>  
> +	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
> +	local vol
> +
>  	mkdir -p /var/lock
>  	local part_label="$(linksys_get_target_firmware)"
>  	touch /var/lock/fw_printenv.lock
> @@ -64,7 +70,7 @@ platform_do_upgrade_linksys() {
>  		exit 1
>  	fi
>  
> -	local target_mtd=$(find_mtd_part $part_label)
> +	local target_mtd=$(find_mtd_part "$part_label")
>  
>  	[ "$magic_long" = "73797375" ] && {
>  		CI_KERNPART="$part_label"
> @@ -74,8 +80,6 @@ platform_do_upgrade_linksys() {
>  			CI_UBIPART="alt_rootfs"
>  		fi
>  
> -		# remove "squashfs" vol (in case we are flashing over a stock image, which is also UBI)
> -
>  		local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
>  		if [ ! "$mtdnum" ]; then
>  			echo "cannot find ubi mtd partition $CI_UBIPART"
> @@ -89,15 +93,14 @@ platform_do_upgrade_linksys() {
>  			ubidev="$( nand_find_ubi "$CI_UBIPART" )"
>  		fi
>  
> -		if [ "$ubidev" ]; then
> -			local squash_ubivol="$( nand_find_volume $ubidev squashfs )"
> -			# kill volume
> -			[ "$squash_ubivol" ] && ubirmvol /dev/$ubidev -N squashfs || true
> -		fi
> +		[ "$ubidev" ] && for vol in $rm_oem_fw_vols ; do
> +			ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
> +		done
>  
>  		# complete std upgrade
>  		nand_upgrade_tar "$1"
>  	}
> +
>  	[ "$magic_long" = "27051956" ] && {
>  		# This magic is for a uImage (which is a sysupgrade image)
>  		# check firmwares' rootfs types
> @@ -107,7 +110,8 @@ platform_do_upgrade_linksys() {
>  		if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ]; then
>  			# we're upgrading from a firmware with UBI to one with UBI
>  			# erase everything to be safe
> -			# - Is that really needed? Won't remove (or comment) the if, because it may be needed in a future device.
> +			# - Is that really needed? Won't remove (or comment) the if,
> +			#   because it may be needed in a future device.
>  			#mtd erase $part_label
>  			#get_image "$1" | mtd -n write - $part_label
>  			echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
> 





_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list