[OpenWrt-Devel] [PATCH v3 4/6] ar71xx/ath79: Merge eeprom/caldata extraction into eeprom.sh
Adrian Schmutzler
freifunk at adrianschmutzler.de
Wed Feb 27 17:18:07 EST 2019
eeprom/caldata extraction is the same across different targets
and also uses similar functions compared to each other.
This patch is based on the proposed unification by Petr Štetiar.
While this only covers ath79/ar71xx, others target supposedly
will be merged easily.
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
New in v3:
Merged from the migration patches in my alternate patchset,
which is obsoleted now.
---
package/base-files/files/lib/functions/eeprom.sh | 88 ++++++++++++++++++++
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 97 +++++-----------------
.../etc/hotplug.d/firmware/11-ath10k-caldata | 78 +++++------------
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 84 +++++--------------
.../etc/hotplug.d/firmware/11-ath10k-caldata | 60 ++++---------
5 files changed, 171 insertions(+), 236 deletions(-)
create mode 100644 package/base-files/files/lib/functions/eeprom.sh
diff --git a/package/base-files/files/lib/functions/eeprom.sh b/package/base-files/files/lib/functions/eeprom.sh
new file mode 100644
index 0000000000..80df3bb359
--- /dev/null
+++ b/package/base-files/files/lib/functions/eeprom.sh
@@ -0,0 +1,88 @@
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+eeprom_die() {
+ echo "eeprom: " "$*"
+ exit 1
+}
+
+ath10kcal_die() {
+ echo "ath10cal: " "$*"
+ exit 1
+}
+
+mtd_eeprom_extract() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || \
+ eeprom_die "no mtd device found for partition $part"
+
+ dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ eeprom_die "failed to extract from $mtd"
+}
+
+mtd_eeprom_extract_check() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd cal_size
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || \
+ eeprom_die "no mtd device found for partition $part"
+
+ # Check that the calibration data size in header equals the desired size
+ cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"')
+
+ [ "$count" = "$cal_size" ] || \
+ eeprom_die "no calibration data found in $part"
+
+ dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ eeprom_die "failed to extract from $mtd"
+}
+
+mtd_eeprom_extract_reverse() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd
+ local reversed
+ local caldata
+
+ mtd=$(find_mtd_chardev "$part")
+ reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
+
+ for byte in $reversed; do
+ caldata="\x${byte}${caldata}"
+ done
+
+ printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+}
+
+ubi_eeprom_extract() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local ubidev=$(nand_find_ubi $CI_UBIPART)
+ local ubi
+
+ ubi=$(nand_find_volume $ubidev $part)
+ [ -n "$ubi" ] || \
+ eeprom_die "no UBI volume found for $part"
+
+ dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ eeprom_die "failed to extract from $ubi"
+}
+
+ath10kcal_from_file() {
+ local source=$1
+ local offset=$2
+ local count=$3
+
+ dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ ath10kcal_die "failed to extract calibration data from $source"
+}
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 208d5f6bff..6b94b19ee7 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,60 +2,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_ubi_eeprom_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local ubidev=$(nand_find_ubi $CI_UBIPART)
- local ubi
-
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath9k_eeprom_die "no UBI volume found for $part"
-
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $ubi"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
+. /lib/functions/eeprom.sh
ath9k_patch_firmware_mac() {
local mac=$1
@@ -72,48 +19,48 @@ case "$FIRMWARE" in
case $board in
c-55|\
c-60)
- ath9k_eeprom_extract "art" 4096 2048
+ mtd_eeprom_extract "art" 4096 2048
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
;;
fritz4020|\
fritz450e)
- ath9k_eeprom_extract_reverse "urlader" 5441 1088
+ mtd_eeprom_extract_reverse "urlader" 5441 1088
;;
mr18)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 4096 2048
+ ubi_eeprom_extract "caldata" 4096 2048
else
- ath9k_eeprom_extract "odm-caldata" 4096 2048
+ mtd_eeprom_extract "odm-caldata" 4096 2048
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +1)
;;
r6100 | \
wndr3700v4 | \
wndr4300)
- ath9k_eeprom_extract "caldata" 4096 2048
+ mtd_eeprom_extract "caldata" 4096 2048
ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0)
;;
rambutan)
- ath9k_eeprom_extract "art" 4096 2048
+ mtd_eeprom_extract "art" 4096 2048
;;
wlr8100)
- ath9k_eeprom_extract "art" 4096 2048
+ mtd_eeprom_extract "art" 4096 2048
ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr")
;;
z1)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 4096 2048
+ ubi_eeprom_extract "caldata" 4096 2048
else
- ath9k_eeprom_extract "origcaldata" 4096 2048
+ mtd_eeprom_extract "origcaldata" 4096 2048
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +2)
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
@@ -121,39 +68,39 @@ case "$FIRMWARE" in
"pci_wmac0.eeprom")
case $board in
c-55)
- ath9k_eeprom_extract "art" 20480 2048
+ mtd_eeprom_extract "art" 20480 2048
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +2)
;;
fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 5441 1088
+ mtd_eeprom_extract_reverse "urloader" 5441 1088
;;
mr18)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 20480 2048
+ ubi_eeprom_extract "caldata" 20480 2048
else
- ath9k_eeprom_extract "odm-caldata" 20480 2048
+ mtd_eeprom_extract "odm-caldata" 20480 2048
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +2)
;;
wndr3700v4 | \
wndr4300)
- ath9k_eeprom_extract "caldata" 20480 2048
+ mtd_eeprom_extract "caldata" 20480 2048
ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 12)
;;
z1)
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 86016 4096
+ ubi_eeprom_extract "caldata" 86016 4096
else
- ath9k_eeprom_extract "origcaldata" 86016 4096
+ mtd_eeprom_extract "origcaldata" 86016 4096
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +3)
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
@@ -164,14 +111,14 @@ case "$FIRMWARE" in
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 36864 2048
+ ubi_eeprom_extract "caldata" 36864 2048
else
- ath9k_eeprom_extract "odm-caldata" 36864 2048
+ mtd_eeprom_extract "odm-caldata" 36864 2048
fi
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +3)
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index cd5c1c2bcb..37223686fb 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,38 +1,6 @@
#!/bin/sh
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$2
- local count=$3
-
- dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd cal_size
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- # Check that the calibration data size in header equals the desired size
- cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"')
-
- [ "$count" = "$cal_size" ] || \
- ath10kcal_die "no calibration data found in $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
+. /lib/functions/eeprom.sh
ath10kcal_patch_mac() {
local mac=$1
@@ -57,17 +25,17 @@ case "$FIRMWARE" in
mr1750|\
mr1750v2|\
om5p-acv2)
- ath10kcal_extract "ART" 20480 2116
+ mtd_eeprom_extract_check "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
archer-c25-v1|\
tl-wdr6500-v2)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
archer-c7-v4|\
archer-c7-v5)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
cf-e355ac-v1|\
@@ -81,42 +49,42 @@ case "$FIRMWARE" in
oolite-v5.2-dev|\
sr3200|\
xd3200)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
;;
dap-2695-a1)
- ath10kcal_extract "radiocfg" 20480 2116
+ mtd_eeprom_extract_check "radiocfg" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
;;
dir-869-a1|\
qihoo-c301)
- ath10kcal_extract "radiocfg" 20480 2116
+ mtd_eeprom_extract_check "radiocfg" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
;;
dw33d)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 18)
;;
epg5000|\
esr1750)
- ath10kcal_extract "caldata" 20480 2116
+ mtd_eeprom_extract_check "caldata" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
gl-ar750s|\
gl-ar750|\
tl-wpa8630)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
koala)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 12) +0)
;;
mc-mac1200r)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
;;
r6100)
- ath10kcal_extract "caldata" 20480 2116
+ mtd_eeprom_extract_check "caldata" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2)
;;
rb-952ui-5ac2nd|\
@@ -126,15 +94,15 @@ case "$FIRMWARE" in
re355|\
re450|\
tl-wr902ac-v1)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
unifiac-lite|\
unifiac-pro)
- ath10kcal_extract "EEPROM" 20480 2116
+ mtd_eeprom_extract_check "EEPROM" 20480 2116
;;
wi2a-ac200i)
- ath10kcal_extract "ART" 20480 2116
+ mtd_eeprom_extract_check "ART" 20480 2116
;;
esac
;;
@@ -142,16 +110,16 @@ case "$FIRMWARE" in
case $board in
archer-c5|\
archer-c7)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
nbg6616|\
nbg6716)
- ath10kcal_extract "RFdata" 20480 2116
+ mtd_eeprom_extract_check "RFdata" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
om5p-ac)
- ath10kcal_extract "ART" 20480 2116
+ mtd_eeprom_extract_check "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
rb-911g-5hpacd|\
@@ -160,7 +128,7 @@ case "$FIRMWARE" in
ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
;;
wlr8100)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract_check "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
esac
@@ -173,18 +141,18 @@ case "$FIRMWARE" in
archer-c60-v1|\
cf-e355ac-v2|\
cf-e375ac)
- ath10kcal_extract "art" 20480 12064
+ mtd_eeprom_extract_check "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
archer-c60-v2)
- ath10kcal_extract "art" 20480 12064
+ mtd_eeprom_extract_check "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
cf-e385ac)
- ath10kcal_extract "art" 20480 12064
+ mtd_eeprom_extract_check "art" 20480 12064
;;
esac
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index d8b292f4da..685bab4b05 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,45 +2,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
+. /lib/functions/eeprom.sh
xor() {
local val
@@ -98,50 +60,50 @@ case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
avm,fritz4020)
- ath9k_eeprom_extract_reverse "urlader" 5441 1088
+ mtd_eeprom_extract_reverse "urlader" 5441 1088
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 4096 1088
+ mtd_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 4) 2
;;
dlink,dir-859-a1)
- ath9k_eeprom_extract "art" 4096 1088
+ mtd_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr|\
iodata,wn-ac1600dgr2|\
iodata,wn-ag300dgr)
- ath9k_eeprom_extract "art" 4096 1088
+ mtd_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
;;
nec,wg800hp)
- ath9k_eeprom_extract "art" 4096 1088
+ mtd_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_text board_data 1664) 2
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
avm,fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 5441 1088
+ mtd_eeprom_extract_reverse "urloader" 5441 1088
;;
buffalo,whr-g301n|\
buffalo,wzr-hp-g302h-a1a0|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
- ath9k_eeprom_extract "art" 4096 3768
+ mtd_eeprom_extract "art" 4096 3768
;;
buffalo,wzr-hp-g450h)
- ath9k_eeprom_extract "ART" 4096 1088
+ mtd_eeprom_extract "ART" 4096 1088
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 20480 1088
+ mtd_eeprom_extract "art" 20480 1088
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 24) 1) 2
;;
ocedo,raccoon|\
@@ -149,7 +111,7 @@ case "$FIRMWARE" in
tplink,tl-wdr4300|\
tplink,tl-wdr4900-v2|\
winchannel,wb2000)
- ath9k_eeprom_extract "art" 20480 1088
+ mtd_eeprom_extract "art" 20480 1088
;;
netgear,wnr612-v2|\
on,n150r|\
@@ -167,20 +129,20 @@ case "$FIRMWARE" in
ubnt,bullet-m|\
ubnt,nano-m|\
ubnt,rocket-m)
- ath9k_eeprom_extract "art" 4096 4096
+ mtd_eeprom_extract "art" 4096 4096
;;
pqi,air-pen)
- ath9k_eeprom_extract "art" 4096 2002
+ mtd_eeprom_extract "art" 4096 2002
;;
ubnt,unifi)
- ath9k_eeprom_extract "art" 4096 2048
+ mtd_eeprom_extract "art" 4096 2048
;;
wd,mynet-wifi-rangeextender)
- ath9k_eeprom_extract "art" 4096 4096
+ mtd_eeprom_extract "art" 4096 4096
ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 2
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
@@ -190,14 +152,14 @@ case "$FIRMWARE" in
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
- ath9k_eeprom_extract "art" 4096 3768
+ mtd_eeprom_extract "art" 4096 3768
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 4096 3768
+ mtd_eeprom_extract "caldata" 4096 3768
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
@@ -207,14 +169,14 @@ case "$FIRMWARE" in
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
- ath9k_eeprom_extract "art" 20480 3768
+ mtd_eeprom_extract "art" 20480 3768
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 20480 3768
+ mtd_eeprom_extract "caldata" 20480 3768
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ eeprom_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a19c0c2478..76a6f2ced6 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,6 +1,7 @@
#!/bin/sh
. /lib/functions/k2t.sh
+. /lib/functions/eeprom.sh
# xor multiple hex values of the same length
xor() {
@@ -18,34 +19,6 @@ xor() {
printf "%0${retlen}x" "$ret"
}
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$2
- local count=$3
-
- dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
ath10kcal_patch_mac() {
local mac=$1
@@ -79,9 +52,6 @@ ath10kcal_patch_mac_crc() {
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
@@ -92,52 +62,52 @@ case "$FIRMWARE" in
devolo,dvl1750c|\
devolo,dvl1750e|\
devolo,dvl1750i)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1)
;;
dlink,dir-859-a1)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
;;
elecom,wrc-1750ghbk2-i)
- ath10kcal_extract "ART" 20480 2116
+ mtd_eeprom_extract "ART" 20480 2116
;;
engenius,ews511ap|\
glinet,gl-ar750s|\
glinet,gl-x750|\
tplink,re450-v2)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
nec,wg800hp)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
;;
ocedo,koala)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
;;
openmesh,om5p-ac-v2)
- ath10kcal_extract "ART" 20480 2116
+ mtd_eeprom_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
tplink,archer-c2-v3)
- ath10kcal_extract "ART" 20480 2116
+ mtd_eeprom_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
tplink,archer-c7-v2)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
;;
tplink,archer-a7-v5|\
tplink,archer-c7-v4|\
tplink,archer-c7-v5)
- ath10kcal_extract "art" 20480 2116
+ mtd_eeprom_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
ubnt,unifiac-lite|\
@@ -147,14 +117,14 @@ case "$FIRMWARE" in
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
ubnt,unifiac-pro)
- ath10kcal_extract "EEPROM" 20480 2116
+ mtd_eeprom_extract "EEPROM" 20480 2116
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
phicomm,k2t)
- ath10kcal_extract "art" 20480 12064
+ mtd_eeprom_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -162,7 +132,7 @@ case "$FIRMWARE" in
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
tplink,archer-c6-v2)
- ath10kcal_extract "art" 20480 12064
+ mtd_eeprom_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
--
2.11.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list