[OpenWrt-Devel] [PATCH 2/2] ath79: GL.iNet AR300M family: Correct DTS LED definitions

Jeff Kletsky lede at allycomm.com
Tue Feb 5 20:25:00 EST 2019

On 2/5/19 4:19 PM, Szabolcs Hubai wrote:
> Hi Jeff,
> sorry for being late in the topic, but that [1] red "status" LED is
> GL-AR300M-Lite specific, and isn't suitable for the original GL-AR300M
> model, IMHO.
> Here are my points:
> I opened my GL-AR300MD's case (a limited, dualband model), and it has
> a "GL-AR300M-V1.3.1" print on it's PCB.
> It has the exactly same pinouts as it could be seen on the
> documentation page [2] (picture attached) and it's WLAN LED is red,
> the other two, LAN and SYS (in DTS: "status") are green.
> I'm unsure how are the LED colors in the other GL-AR300M sub-models.
I checked the GL.iNet site and the video of the GL-AR300M at
published in January, 2017, shows two green and a red LED,
consistent with your description.

On the other hand, GL.iNet's source shows them as all "green"
(as is the AR300M-Lite I have in hand)


I'm fine with leaving the color alone or being consistent with current 
and the OEM's definitions. Shoot, my Archer C7 v2 has "blue" LEDs under 
Too bad that doesn't actually change the color of them ;)

The GPIO assignments are still in need of correction, as far as I can 
tell, for all variants.


openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list