[OpenWrt-Devel] [PATCH] ramips: merge cases in 02_network

Adrian Schmutzler freifunk at adrianschmutzler.de
Sat Aug 31 10:41:27 EDT 2019


This merges three cases with a single switch port.

6t at eth0 and 6 at eth0 should be equivalent.

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 .../linux/ramips/base-files/etc/board.d/02_network | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e19a618389..17b3af8fce 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -274,9 +274,11 @@ ramips_setup_interfaces()
 			"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6 at eth0"
 		;;
 	comfast,cf-wr800n|\
-	hnet,c108)
+	hnet,c108|\
+	tplink,tl-wr902ac-v3|\
+	trendnet,tew-638apb-v2)
 		ucidef_add_switch "switch0" \
-			"4:lan" "6t at eth0"
+			"4:lan" "6 at eth0"
 		;;
 	cudy,wr1000)
 		ucidef_add_switch "switch0" \
@@ -446,14 +448,6 @@ ramips_setup_interfaces()
 			"0:lan" "1:lan" "2:lan" "3:lan" "6t at eth0"
 		ucidef_set_interface_wan "usb0"
 		;;
-	tplink,tl-wr902ac-v3)
-		ucidef_add_switch "switch0" \
-			"4:lan" "6 at eth0"
-		;;
-	trendnet,tew-638apb-v2)
-		ucidef_add_switch "switch0" \
-			"4:lan" "6 at eth0"
-		;;
 	vocore,vocore2|\
 	vocore,vocore2-lite)
 		ucidef_add_switch "switch0" \
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list