[OpenWrt-Devel] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped old beacon

Кирилл Луконин klukonin at gmail.com
Thu Aug 22 14:15:22 EDT 2019


Hello.


This bug was fixed in the master branch.
Please try latest snapshot.

Best Regards,
Lukonin Kirill


чт, 22 авг. 2019 г. в 23:06, Yaroslav Petrov <info at lank.me>:

> Hello all,
>
>
> I use OpenWrt 19.07 on BT Home Hub 5A, but it seams ath10k-ct driver is
> really unstable (it work only first 2-10 minutes). The ath10k driver
> work without problem. Can somebody help me with this issue ?
>
>
> ---- OpenWrt 19.07-SNAPSHOT, r10323-7d300326ee ----
>
> dmesg:
> ...
> [   16.523669] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c
> chip_id 0x043202ff sub 0000:0000
> [   16.531585] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 0
> [   16.548528] ath10k_pci 0000:02:00.0: firmware ver
> 10.1-ct-8x-__fW-022-fddd041b api 2 features
> wmi-10.x,has-wmi-mgmt-tx,adaptive-cca,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT
>
> crc32 01d1f13e
> [   16.600527] ath10k_pci 0000:02:00.0: Direct firmware load for
> ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
> [   16.609654] ath10k_pci 0000:02:00.0: Falling back to user helper
> [   16.865926] firmware ath10k!QCA988X!hw2.0!board-2.bin:
> firmware_loading_store: map pages failed
> [   16.874176] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A
> crc32 bebc7c08
> [   17.754597] ath10k_pci 0000:02:00.0: 10.1 wmi init: vdevs: 16 peers:
> 127  tid: 256
> [   17.769910] ath10k_pci 0000:02:00.0: wmi print 'P 128 V 8 T 410'
> [   17.774908] ath10k_pci 0000:02:00.0: wmi print 'msdu-desc: 1424
> sw-crypt: 0 ct-sta: 0'
> [   17.782548] ath10k_pci 0000:02:00.0: wmi print 'alloc rem: 24648
> iram: 26168'
> [   17.846700] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 2 htt-op 2
> cal file max-sta 128 raw 0 hwcrypto 1
> [   17.858172] ath10k_pci 0000:02:00.0: NOTE:  Firmware DBGLOG output
> disabled in debug_mask: 0x10000000
> ...
> [ 9397.052366] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.154773] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.257174] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.359596] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.461992] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.564396] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.666805] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.769214] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.871646] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9397.974036] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.076445] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.178844] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.281259] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.383675] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.486071] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.588478] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.690883] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.793301] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.895708] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9398.998112] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.100512] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.202918] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.305328] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.407740] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.510149] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.612543] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.714959] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.817366] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9399.919780] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.022177] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.124590] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.184417] ath10k_pci 0000:02:00.0: wmi command 36893 timeout,
> restarting hardware
> [ 9400.191096] ath10k_pci 0000:02:00.0: failed to delete peer
> 99:99:99:99:99:99 for vdev 0: -11
> [ 9400.199527] ath10k_pci 0000:02:00.0: found sta peer 99:99:99:99:99:99
> (ptr 8698a600 id 361) entry on vdev 0 after it was supposedly removed
> [ 9400.212109] ------------[ cut here ]------------
> [ 9400.216791] WARNING: CPU: 1 PID: 3599 at
> backports-4.19.66-1/net/mac80211/sta_info.c:1004
> sta_set_sinfo+0xcdc/0xd88 [mac80211]
> [ 9400.227825] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.235153] Modules linked in: ath9k ath9k_common ath9k_hw ath10k_pci
> ath10k_core ath pppoe nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT
> ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport
> xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT
> xt_LOG xt_FLOWOFFLOAD wireguard ums_usbat ums_sddr55 ums_sddr09
> ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress
> ums_alauda pppox ppp_async owl_loader nf_reject_ipv4 nf_nat_redirect
> nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4
> nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4
> nf_conntrack_rtcache nf_conntrack ltq_deu_vr9 iptable_mangle
> iptable_filter ip_tables crc_ccitt compat drv_dsl_cpe_api drv_mei_cpe
> ledtrig_oneshot ledtrig_gpio xt_set ip_set_list_set ip_set_hash_netportnet
> [ 9400.307991]  ip_set_hash_netport ip_set_hash_netnet
> ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac
> ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport
> ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac
> ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common
> ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables
> nf_reject_ipv6 pppoatm ppp_generic slhc ip6_udp_tunnel udp_tunnel br2684
> atm nls_utf8 drv_ifxos usb_storage dwc2 ledtrig_transient sd_mod
> scsi_mod gpio_button_hotplug ext4 mbcache jbd2 crc32c_generic
> [ 9400.356722] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.364303] CPU: 1 PID: 3599 Comm: hostapd Not tainted 4.14.138 #0
> [ 9400.370024] Stack : 00000000 877e3000 00000028 800815a8 80670000
> 8061590c 00000000 00000000
> [ 9400.378376]         805dbdc4 851d3ae4 87da592c 806506a7 805d6c54
> 00000001 851d3a88 74ab3c97
> [ 9400.386733]         00000000 00000000 807b0000 00010000 807a88b0
> 00000000 00000007 00000000
> [ 9400.395087]         000001d3 d5000000 000001d2 00000000 80000000
> 80670000 00000000 00000009
> [ 9400.403443]         86808e9c 000003ec 851d3cac 877e3000 00000001
> 00000000 00000004 807a0004
> [ 9400.411799]         ...
> [ 9400.414240] Call Trace:
> [ 9400.416693] [<80011664>] show_stack+0x58/0x100
> [ 9400.421155] [<804c8824>] dump_stack+0xe4/0x120
> [ 9400.425588] [<80037010>] __warn+0xe0/0x180
> [ 9400.429673] [<80037140>] warn_slowpath_null+0x1c/0x2c
> [ 9400.434832] [<86808e9c>] sta_set_sinfo+0xcdc/0xd88 [mac80211]
> [ 9400.440974] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.448658] ---[ end trace 214aaa49bd7f9de7 ]---
> [ 9400.534228] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.636620] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.739033] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.841432] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9400.943845] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.046257] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.148660] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.251079] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.353475] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.455885] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.558281] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.660685] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.763092] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.865506] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9401.967916] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.070317] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.172726] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.275130] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.377538] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.479940] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.582349] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.684756] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.787167] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.889569] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9402.991969] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9403.094372] ath10k_pci 0000:02:00.0: SWBA overrun on vdev 0, skipped
> old beacon
> [ 9403.189718] ath10k_pci 0000:02:00.0: removing peer, cleanup-all,
> deleting: peer 8698b600 vdev: 0 addr: 54:64:00:00:00:00
> [ 9403.306730] ieee80211 phy0: Hardware restart was requested
> [ 9403.310992] ath10k_pci 0000:02:00.0: failed to set cts protection for
> vdev 0: -143
> [ 9403.318503] ath10k_pci 0000:02:00.0: failed to set preamble for vdev
> 0: -143
> [ 9403.325542] ath10k_pci 0000:02:00.0: failed to set mgmt tx rate -143
> [ 9404.336772] ath10k_pci 0000:02:00.0: 10.1 wmi init: vdevs: 16 peers:
> 127  tid: 256
> [ 9404.352122] ath10k_pci 0000:02:00.0: wmi print 'P 128 V 8 T 410'
> [ 9404.356800] ath10k_pci 0000:02:00.0: wmi print 'msdu-desc: 1424
> sw-crypt: 0 ct-sta: 0'
> [ 9404.365199] ath10k_pci 0000:02:00.0: wmi print 'alloc rem: 24648
> iram: 26168'
> [ 9404.431453] ath10k_pci 0000:02:00.0: pdev param 0 not supported by
> firmware
> [ 9404.454484] ath10k_pci 0000:02:00.0: device successfully recovered
>
>
> opkg list | grep -e host -e wpa -e ath
>
> ath10k-firmware-qca988x-ct - 2018-10-10-d366b80d-1
> hostapd-common - 2018-12-02-c2c6c01b-6
> hostapd-openssl - 2018-12-02-c2c6c01b-6
> hostapd-utils - 2018-12-02-c2c6c01b-6
> kmod-ath - 4.14.138+4.19.66-1-1
> kmod-ath10k-ct - 4.14.138+2019-05-08-f98b6dc4-1
> kmod-ath9k - 4.14.138+4.19.66-1-1
> kmod-ath9k-common - 4.14.138+4.19.66-1-1
> wpa-cli - 2018-12-02-c2c6c01b-6
> wpa-supplicant-mesh-openssl - 2018-12-02-c2c6c01b-6
>
>
> cat /etc/config/wireless
>
> config wifi-device 'radio0'
>      option type 'mac80211'
>      option channel '36'
>      option hwmode '11a'
>      option path 'pci0000:01/0000:01:00.0/0000:02:00.0'
>      option htmode 'VHT80'
>      option txpower '17'
>      option country 'DE'
>      option legacy_rates '0'
>      option distance '20'
>
> config wifi-iface 'default_radio0'
>      option device 'radio0'
>      option network 'lan'
>      option mode 'ap'
>      option ssid 'WIFI1'
>      option encryption 'sae'
>      option key '1111111111111111'
>
> config wifi-device 'radio1'
>      option type 'mac80211'
>      option channel '11'
>      option hwmode '11g'
>      option path 'pci0000:00/0000:00:0e.0'
>      option htmode 'HT20'
>      option country 'DE'
>      option legacy_rates '0'
>      option distance '30'
>      option txpower '14'
>
> config wifi-iface 'default_radio1'
>      option device 'radio1'
>      option network 'lan'
>      option mode 'ap'
>      option ssid 'WIFI2'
>      option encryption 'sae-mixed'
>      option key '1111111111111111'
>      option ieee80211r '1'
>      option nasid '111111111111'
>      option mobility_domain '2345'
>      option ft_over_ds '1'
>      option ft_psk_generate_local '1'
>      option r1_key_holder '5464D901CE24'
>      list r0kh
> '11:11:11:11:11:11,111111111111,00000000000000000000000000000000'
>      list r0kh
> '22:22:22:22:22:22,222222222222,00000000000000000000000000000000'
>      list r1kh
> '11:11:11:11:11:11,11:11:11:11:11:11,00000000000000000000000000000000'
>      list r1kh
> '22:22:22:22:22:22,22:22:22:22:22:22,00000000000000000000000000000000'
>
> Best regards
> Yaroslav
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20190822/3a8ede62/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list