[OpenWrt-Devel] VDSL with TP-link tdw8970 / tdw8980

[Torsten Duwe]

On Wed, 26 Sep 2018 13:08:22 +0200 Daniel Golle <daniel at makrotopia.org> wrote:

> The safe path is to use the VDSL-firmware-blob which is shipped in
> T-Com's own Speedport router firmware.

Sounds tempting...

> See
> https://xdarklight.github.io/lantiq-xdsl-firmware-info/

> Downloads for 5.6.8.4.1.7-5.6.7.2.1.2
> https://www.telekom.de/dlp/eki/downloads/Speedport/Speedport%20W%20921V/Firmware_Speedport_W921V_1.39.000.bin

As we found out off-list, this blob got updated and has moved:
https://github.com/xdarklight/lantiq-xdsl-firmware-info/issues/13

It establishes the connection here (slower than the blob below),
with interleave, and then drops it almost immediately again!

Sebastian Moeller suggested I use
"
5.8.1.5.0.7-5.8.0.9.0.1 29de7210958de4ba57464685f680dd66e6fb5b36
898856 	8.1.5 8.0.9 	VDSL over ISDN incl. vectoring support
"
from the list, which did the trick.

Thank you both for your quick and accurate help!
(even if the speedport FW didn't quite work out -- maybe it does elsewhere)

Thanks a lot!

	Torsten

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel