[OpenWrt-Devel] [PATCH 3/4] ipq40xx: nbg6617: switch to upstream boardfile variant

Robert Marko robimarko at gmail.com
Mon Oct 22 17:04:14 EDT 2018


On Mon, 22 Oct 2018 at 23:03, Christian Lamparter <chunkeey at gmail.com> wrote:
>
> The NBG6617's boardfile was merged and this device can
> now switch to the upstream ath10k board-2.bin.

This is only applicable if ath10k-firmware is selected as by default
ath10k-firmware-ct is used and that one uses the old board files from
May in Kalles ath10k-firmware repository.
>
> Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
> ---
>  .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts       | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
> index 4d366142a1..c74fce55fa 100644
> --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
> +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
> @@ -301,10 +301,12 @@
>
>  &wifi0 {
>         status = "okay";
> +       qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
>  };
>
>  &wifi1 {
>         status = "okay";
> +       qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
>  };
>
>  &usb3_ss_phy {
> --
> 2.19.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list