[OpenWrt-Devel] trying to acheive close to 1 Gbps with 802.11ac 3x3 mimo ath10k Compex wle900vx

[Joe Ayers]

Ditto on channel width, max rate is cut in half with cutting channel
width in half.  How do you have the antennas oriented?  If all are in
the same plane or polarization, then attempting to transmit different
data on the antennas will directly compete and interfere with all the
signals on the same signal polarization.  The radio would likely end
up sending the same data out all the antennas using lower MCS rates.
Orient the antennas, probably need 60deg angles for 3 antennas to
minimize the interference between polarization.   Align the antennas
the same orientation on both ends.

Joe AE6XE

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel