[OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx
robimarko at gmail.com
Fri Nov 9 12:11:14 EST 2018
Take a look at this example.
You have to use ath10k-bdencoder
On Fri, 9 Nov 2018 at 16:07, Clément Péron <peron.clem at gmail.com> wrote:
> Hi Robert,
> Thanks for the info, I have looked at the ipq-wifi but for exemple the
> "board-zyxel_nbg6617.bin" and "board-zyxel_wre6606.bin" are already
> combined into one board.bin. and they just replace the board-2.bin,
> But how are they combined ?
> I have seems some example to upstream the BDFs like here :
> But they don't explain how to combine both 2G and 5G together.
> On Fri, 9 Nov 2018 at 15:47, Robert Marko <robimarko at gmail.com> wrote:
> > You have to use the ipq-wifi package
> > On Fri, Nov 9, 2018, 15:25 Clément Péron <peron.clem at gmail.com wrote:
> >> Hi,
> >> I'm using a IPQ40xx board with kernel 4.14 (DK05 variant), I have
> >> successfully extract the pre-cal but i'm now stuck at the board-2.bin
> >> loading.
> >> When booting the ath10k_pci is looking for
> >> "bus=ahb,bmi-chip-id=0,bmi-board-id=16" and a
> >> "bus=ahb,bmi-chip-id=0,bmi-board-id=27" however these board-id are
> >> unknown in the board-2.bin file.
> >> Looking at the Qualcomm OpenWRT release there is some board files that
> >> are not available in the upstream board-2.bin.
> >> Like
> >> boardData_1_0_IPQ4019_DK01_2G.bin
> >> boardData_1_0_IPQ4019_DK01_5G.bin
> >> boardData_1_0_IPQ4019_DK03_2G.bin
> >> boardData_1_0_IPQ4019_DK03_5G.bin
> >> boardData_1_0_IPQ4019_DK05_2G.bin
> >> boardData_1_0_IPQ4019_DK05_5G.bin
> >> etc....
> >> Is there anyway to force the driver to load one of this file instead
> >> of looking for the board-2.bin ?
> >> Thanks,
> >> Clement
> >> _______________________________________________
> >> openwrt-devel mailing list
> >> openwrt-devel at lists.openwrt.org
> >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel