[OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx

Clément Péron peron.clem at gmail.com
Fri Nov 9 09:25:08 EST 2018


Hi,

I'm using a IPQ40xx board with kernel 4.14 (DK05 variant), I have
successfully extract the pre-cal but i'm now stuck at the board-2.bin
loading.

When booting the ath10k_pci is looking for
"bus=ahb,bmi-chip-id=0,bmi-board-id=16" and a
"bus=ahb,bmi-chip-id=0,bmi-board-id=27" however these board-id are
unknown in the board-2.bin file.

Looking at the Qualcomm OpenWRT release there is some board files that
are not available in the upstream board-2.bin.

Like
boardData_1_0_IPQ4019_DK01_2G.bin
boardData_1_0_IPQ4019_DK01_5G.bin
boardData_1_0_IPQ4019_DK03_2G.bin
boardData_1_0_IPQ4019_DK03_5G.bin
boardData_1_0_IPQ4019_DK05_2G.bin
boardData_1_0_IPQ4019_DK05_5G.bin
etc....

Is there anyway to force the driver to load one of this file instead
of looking for the board-2.bin ?

Thanks,
Clement

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list