[OpenWrt-Devel] znc: configure listeners in modern way

[user1024]

Hello
Given patches add support multiple listeners, ssl, etc.
Signed-off-by: User 1024 user1024 at tut.by
diff --git a/net/znc/files/znc.conf b/net/znc/files/znc.conf
index 1b0d842..6879cbf 100644
--- a/net/znc/files/znc.conf
+++ b/net/znc/files/znc.conf
@@ -1,8 +1,8 @@
 config znc
-	# where to listen for connections
-	list listener	'192.168.1.1 1234'
-	# If using SSL sockets, use the following certifcate:
-	# option znc_ssl_cert '/etc/znc.cert'
+	# If you need to use SSL sockets, use the following
certificate path
+	# simple cmd: cat my.key my.crt dhparam.pem > /etc/znc.pem
+	# make sure znc user can read certificate
+	# option znc_ssl_cert '/etc/znc.pem'
 
 	# load global modules (You need to install them first):
 	# list module 'fail2ban'
@@ -10,6 +10,22 @@ config znc
 	# remove this to enable the service
 	option disabled 1
 
+config listener 'sampleListener'
+	# to get plain irc protocol
+	option allowirc 'true'
+	# to get web irc
+	#option allowweb 'false'
+	# ip to bind
+	option host '192.168.1.1'
+	# port to use
+	option port '1234'
+	# listen on ipv4
+	option ipv4 'true'
+	# listen on ipv6
+	#option ipv6 'false'
+	# to get irc encrypted, valid certificate required, see znc
section to details
+	#option ssl 'true'
+
 config user 'sampleUser'
 	# Use either a plain text password or use the full sha256#...
line. # You can generate one with 'znc -s'.
diff --git a/net/znc/files/znc.init b/net/znc/files/znc.init
index 0277aff..2e219e5 100644
--- a/net/znc/files/znc.init
+++ b/net/znc/files/znc.init
@@ -1,5 +1,5 @@
 #!/bin/sh /etc/rc.common
-# Copyright (C) 2010 Openwrt.org
+# Copyright (C) 2018 Openwrt.org
 
 START=60
 
@@ -71,7 +71,7 @@ znc_global() {
 		mkdir -p $ZNC_CONFIG_PATH/configs/
 		[ ! -f "$ZNC_CONFIG" ] || rm "$ZNC_CONFIG"
 
-		add_param "Version" "1.0"
+		add_param "Version" "1.6"
 
 		config_get anoniplimit "$znc" anoniplimit
 		config_get maxbuffersize "$znc" maxbuffersize
@@ -93,6 +93,37 @@ znc_global() {
 	fi
 }
 
+add_listener() {
+	local listener="$1"
+	local host
+	local port
+	local allowirc
+	local allowweb
+	local ipv4
+	local ipv6
+	local ssl
+
+	config_get host "$listener" host
+	config_get port "$listener" port
+	config_get allowirc "$listener" allowirc
+	config_get allowweb "$listener" allowweb
+	config_get ipv4 "$listener" ipv4
+	config_get ipv6 "$listener" ipv6
+	config_get ssl "$listener" ssl
+
+	echo "<Listener $listener>" >> $ZNC_CONFIG
+
+	[ -z "$host" ] || add_param "  Host" "$host"
+	[ -z "$port" ] || add_param "  Port" "$port"
+	[ -z "$allowirc" ] || add_param "  AllowIRC" "$allowirc"
+        [ -z "$allowweb" ] || add_param "  AllowWeb" "$allowweb"
+	[ -z "$ipv4" ] || add_param "  IPv4" "$ipv4"
+	[ -z "$ipv6" ] || add_param "  IPv6" "$ipv6"
+	[ -z "$ssl" ] || add_param "  SSL" "$ssl"
+
+	echo "</Listener>" >> $ZNC_CONFIG
+}
+
 add_user() {
 	local user="$1"
 	local password

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel