[OpenWrt-Devel] [LEDE-DEV] [PATCH 0/4] Gemini forward-port to kernel v4.14
roman at advem.lv
Sat May 5 11:22:03 EDT 2018
On 2018-05-05 16:35, Linus Walleij wrote:
> On Sat, May 5, 2018 at 11:25 AM, Linus Walleij
> <linus.walleij at linaro.org> wrote:
>> On Fri, May 4, 2018 at 11:49 PM, Linus Walleij
>> <linus.walleij at linaro.org> wrote:
>>> On Fri, May 4, 2018 at 11:37 PM, Roman Yeryomin <roman at advem.lv>
>>>>> The GPIO LEDs does not come up though?
>>>>> CONFIG_LEDS_GPIO is not in config, and
>>>>> /sys/class/leds is empty.
>>>>> Does it need a separate kmod?
>>>> kmod-leds-gpio is part of DEFAULT_PACKAGES now
>>>> I guess you should run menuconfig and/or clean tmp/ to refresh
>>>> package set.
>>> Hm I ran menuconfig and it doesn't work, and removing
>>> tmp/ didn't help either, but selecting a different target
>>> and then selecting CS351x again worked... shaky.
>>> OK rebuilding this overnight and retesting.
>> It is still not working. Do you get GPIO LEDs on your
>> device with this?
>> AFAICT the problem is that there is no script in
>> /etc/modules-boot.d to load the GPIO LED module.
>> I'm digging into it to figure out more about how this
>> module load is supposed to work...
> Sorry probably bad mechanics from my side, like replacing
> the rootfs but not the kernel :(
> The good news is: it works like a charm.
> All vital components are running, drivers probe, modules
> load correctly from the hard drive.
Yeah.. they should be, that's one of the most common modules here :)
root at OpenWrt:/# lsmod | grep led
leds_gpio 2772 0
ledtrig_heartbeat 1570 0
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel