[OpenWrt-Devel] acm3200 wifi problems

[Reinoud Koornstra]

Hi Everyone,

I did build an image forthe acm3200, but it does have wifi problems.

Linux version 4.14.25 (reinoud at router-dev) (gcc version 7.3.0 (OpenWrt
GCC 7.3.0 r6420-4e8f1e9f4c)) #0 SMP Sat Mar 10 10:58:19 2018

Please see below, did anyone else see this?

[    8.632226] <<Marvell Mac80211 Wireless PCIE Network Driver version
10.3.4.0-20180226>>
[    8.640291] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    8.646071] ieee80211 phy0: priv->pcmd_buf = de248000
priv->pphys_cmd_buf = 1e248000
[    8.699213] ieee80211 phy0: fw download start
[    8.699218] ieee80211 phy0: ddr init: download start
[    8.699595] ieee80211 phy0: ddr init: download complete
[    8.837306] ieee80211 phy0: FwSize = 450512 downloaded Size =
450512 curr_iteration 65522
[   11.709190] ieee80211 phy0: fw download complete
[   11.709218] ieee80211 phy0: device node: /soc/pcie/pcie at 1,0
[   11.724587] ieee80211 phy0: pcmd = de248000
[   11.742629] ieee80211 phy0: firmware version: 0x9030205
[   12.103212] ieee80211 phy0: firmware region code: 10
[   12.134797] ieee80211 phy0: 2G disabled, 5G enabled
[   12.139712] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[   12.145175] pci 0000:00:02.0: enabling device (0140 -> 0142)
[   12.150981] ieee80211 phy1: priv->pcmd_buf = d9e9c000
priv->pphys_cmd_buf = 19e9c000
[   12.158518] ieee80211 phy1: fw download start
[   12.158523] ieee80211 phy1: ddr init: download start
[   12.158908] ieee80211 phy1: ddr init: download complete
[   12.300381] ieee80211 phy1: FwSize = 450512 downloaded Size =
450512 curr_iteration 65527
[   13.495197] ieee80211 phy1: fw download complete
[   13.495243] ieee80211 phy1: device node: /soc/pcie/pcie at 2,0
[   13.510657] ieee80211 phy1: pcmd = d9e9c000
[   13.528214] ieee80211 phy1: firmware version: 0x9030205
[   13.888199] ieee80211 phy1: firmware region code: 10
[   13.911809] ieee80211 phy1: 2G enabled, 5G disabled
[   13.916711] ieee80211 phy1: 4 TX antennas, 4 RX antennas

However, it isn't happy at all.

[   17.255416] ieee80211 phy0: change: 0x100
[   17.264214] ieee80211 phy0: change: 0x60
[   17.309628] ieee80211 phy1: change: 0x100
[   17.318217] ieee80211 phy1: change: 0x42
[   17.465219] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   17.482624] ieee80211 phy0: change: 0x40
[   17.699202] ieee80211 phy0: change: 0x60
[   17.797216] ieee80211 phy0: change: 0x100
[   17.851427] ieee80211 phy0: change: 0x100
[   17.859194] ieee80211 phy0: change: 0x62
[   18.024206] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.466483] ieee80211 phy1: staid 1 deleted
[   35.029038] ieee80211 phy1: staid 1 deleted
[   36.438466] ieee80211 phy0: staid 1 deleted
[   38.837777] ieee80211 phy0: staid 1 deleted
[   39.819456] ieee80211 phy0: staid 1 deleted
[   41.645183] ieee80211 phy1: staid 1 deleted
[   48.539349] ieee80211 phy1: staid 1 deleted
[   49.469574] ieee80211 phy1: staid 1 deleted
[   62.347371] ieee80211 phy1: staid 1 deleted
[   66.269491] ieee80211 phy1: staid 1 deleted
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel