[OpenWrt-Devel] [PATCH] ath79: Add support for TL-WR740N/NDv2, TL-MR3220v1, TL-MR3420v1
dioptimizer at hotmail.com
Wed Jun 27 07:50:48 EDT 2018
> Please use your full name here.
> To be honest, I don't like the ar7241_ap99.dtsi filename and I'm not
> sure if it really does make sense to use a dtsi here. For instance,
> only two of the boards have a usb led and your workaround is to move
> the usb led into an extra gpio led node. I prefer to have a complete
> gpio-leds in the dts files instead.
> The spi node from the dtsi is overwritten by one dts. In that case it
> shouldn't be added to dtsi. Instead each dts should have it's own spi
> While I love to remove redundant stuff, we need to keep an eye on
> maintainability/readability. I would like to ensure that we don't
> break something for the boards including the dtsif, we change
> something in the dtsi.
Sorry, but I had to use the dsti file (I renamed it to an readability name),
because it is suitable for three devices and to save space...
Like this https://patchwork.ozlabs.org/patch/928529/
(common dtsi for two devices)
By the way, what was the spi sdcard - its was my mod, and I deleted it
because in the original it is not present.
> Full name here. as well
> ucidef_add_switch should already set the lan interface. A
> ucidef_set_interface_wan "eth1" should be sufficient here.
By the way, here is used eth0 as wan and eth1 as lan ports.
Otherwise it does not work...
> The pending https://github.com/openwrt/openwrt/pull/1091 is about to
> remove all memory nodes in favour of the automatic memory detection.
> Would you please test if the correct of amount of memory is detected
> without the node. If so, it can be removed.
Memory node was removed.
> Please remove the heartbeat trigger. Due to the led-status alias the
> led is used for status/diag signaling.
> Please use a proper tp-link:<colour>:<function> label as well.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel