[OpenWrt-Devel] [PATCH 3/4] ipq40xx: fix OpenMesh A62 dtc warnings

Sven Eckelmann sven.eckelmann at openmesh.com
Fri Jun 8 02:55:31 EDT 2018


On Donnerstag, 7. Juni 2018 17:36:57 CEST Christian Lamparter wrote:
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0 missing ranges for PCI bridge (or not a bridge)
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0 missing bus-range for PCI bridge
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0/ath10k at 0,0 node name is not "pci" or "pcie"
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0/ath10k at 0,0 missing ranges for PCI bridge (or not a bridge)
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0/ath10k at 0,0 incorrect #address-cells for PCI bridge
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0/ath10k at 0,0 incorrect #size-cells for PCI bridge
> Warning (pci_bridge): Node /soc/pci at 40000000/pcie at 0/ath10k at 0,0 missing bus-range for PCI bridge
> Warning (unit_address_format): Failed prerequisite 'pci_bridge'
> Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
> Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
> 
> Cc: Sven Eckelmann <sven.eckelmann at openmesh.com>
> Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
> ---


Tested-by: Sven Eckelmann <sven.eckelmann at open-mesh.com>

Kind regards,
	Sven
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20180608/ed968303/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel


More information about the openwrt-devel mailing list