[OpenWrt-Devel] RFT: ar71xx/mac80211 update

Koen Vandeputte koen.vandeputte at ncentric.com
Wed Aug 22 10:14:02 EDT 2018


>
>
> ar71xx:
>
> I'm now currently testing your ar71xx 4.14 bump (comitted today in 
> master) on a few different targets:
>
> - Gl-mifi
> - Rocket-m5
> - RB912
> - RB2011
> ...
>
> Will let you know the results.
Hi John,

I started with trying on a Mikrotik RB2011 as these have a Serial port.

Ethernet does not function correctly.
I see it transmitting packets,  but receiving fails.



Logs from kernel 4.9:

[    1.052813] switch0: Atheros AR8327 rev. 4 switch registered on 
ag71xx-mdio.0
[    1.766947] libphy: ag71xx_mdio: probed
[    2.400863] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 
[uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    2.412536] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    3.041177] ag71xx-mdio.1: Found an AR934X built-in switch
[    3.093580] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    3.101108] NET: Registered protocol family 10



Logs from kernel 4.14

[    1.066007] switch0: Atheros AR8327 rev. 4 switch registered on 
ag71xx-mdio.0
[    1.073409] Atheros AR8216/AR8236/AR8316: probe of ag71xx-mdio.0:00 
failed with error -22
[    1.102455] libphy: ag71xx_mdio: probed
[    1.737938] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 
[uid=004dd034, driver=Generic PHY]
[    1.747994] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.377642] ag71xx-mdio.1: Found an AR934X built-in switch
[    2.429938] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.437637] NET: Registered protocol family 10



This is currently the only culprit seen on this specific device.
I'll try to test some more ar71xx targets tomorrow ...


Thanks,

Koen

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list