[OpenWrt-Devel] [PATCH] ath79: add support for TP-Link Archer C7 v1

Christian Lamparter chunkeey at gmail.com
Fri Aug 17 17:29:23 EDT 2018


On Friday, August 17, 2018 11:10:59 PM CEST Mathias Kresin wrote:
> 17.08.2018 18:36, Christian Lamparter:
> > TP-Link Archer C7 v1 is a dual band router
> > based on Qualcomm/Atheros QCA9558 + QCA9880.
> > 
> > Specification:
> > 
> >   - 720 MHz CPU
> >   - 128 MB of RAM (Various chips)
> >   - 8 MB of FLASH (Various chips)
> >   - SoC QCA9558 integrated 3T3R 2.4 GHz Wi-Fi
> >   - minipcie slot with 3T3R 5 GHz QCA9880-AR1A (unsupported by ath10k!)
> >   - 5x 10/100/1000 Mbps Ethernet (AR8327N Switch)
> >   - 10x LEDs, 2x software buttons
> > 
> > For further informwation on the device, visit the wiki:
> > <https://openwrt.org/toh/tp-link/archer-c7-1750>
> > 
> > Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
> > ---
> > +&mtdparts {
> > +	uboot: u-boot at 0 {
> > +		reg = <0x000000 0x020000>;
> > +		read-only;
> > +	};
> > +
> > +	firmware at 20000 {
> > +		reg = <0x020000 0x7d0000>;
> > +	};
> > +
> > +	art: art at ff0000 {
> > +		reg = <0x7f0000 0x010000>;
> 
> Just to make sure, it's the unit address and not the reg which is wrong?
yes, the unit address is a copy&paste remain from the v2. The v1(.1) only
has 8 MiB of flash and the node should be:

	art: art at 7f0000 {
		reg = <0x7f0000 0x010000>;
		read-only;
	};

> No need to send a v2, I'll fix it prior to merging the commit.
Thanks.

Christian



_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list