[OpenWrt-Devel] [PATCH 4/5] ath79: add ath9k calibration data MAC addresses patching

[Mathias Kresin]

10.08.2018 23:24, Christian Lamparter:
> This patch copies over the MAC patching helper functions from lantiq's
> target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
> file.
> 
> Not all vendors bothered to write the correct MAC addresses for the
> ath9k wifi into the calibration data. And while ath9k does have some
> special dt-properties to extract the addresses from a fixed position,
> there are still devices that require userspace to edit or modify
> the caldata.
> 
> In my case, the MAC address for the Wi-Fi device is stored in an
> unsorted key-value based "nvram" database and there's an existing
> userspace tool to extract the data.
> 
> Signed-off-by: Christian Lamparter <chunkeey at gmail.com>

I committed this one since it was the most complete version of what was 
implemented by two PRs requiring the firmware mac address patching as well.

Unfortunately, I haven't had the time to check your other patches yet.

Mathias

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel