[OpenWrt-Devel] [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform
f.fainelli at gmail.com
Tue Jan 24 15:49:00 EST 2017
On 01/24/2017 12:47 PM, Linus Walleij wrote:
> Hans, Florian et al: does any of you have a copy of the kernel source
> dump(s) from Teltonika, Raidsonic or Wiliboard?
> Would be nice to have the stuff that vendors are using.
> On Tue, Jan 24, 2017 at 6:24 PM, Hans Ulli Kroll
> <ulli.kroll at googlemail.com> wrote:
>> This is a dual GMAC !
>> They are two different base address for each GMAC and one shared
>> base address for both of them.
>> This is all in one address space which remaps the driver.
>> And to make it worse two interrupt lines, one of them is also shared.
>> Any ideas to "convert" this into DT ??
>> Because I think it's impossible to split both GMAC interfaces ??
> Sounds odd. Yeah hardware.h lists this:
> #define GEMINI_TOE_BASE 0x60000000
> #define GEMINI_GMAC0_BASE 0x6000A000
> #define GEMINI_GMAC1_BASE 0x6000E000
> I guess one approach is to make a driver handling all of it in one,
> let it ioremap all regions and support one or two GMACs on the same
> TOE. More complex solutions is to share the TOE using
> syscons regmap mechanism but it looks cumbersome.
> compatible = "cortina,genesis-gmac-ethernet";
> reg = <0x60000000 0xa000>, <0x6000a000 0x4000>, <0x6000e000 0x4000>;
> interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, <2 IRQ_TYPE_LEVEL_HIGH>;
> Or something like that?
I'd recommend looking at how mv643xx_eth does it, there are shared and
individual portions of the register set in there, with concepts of
"ports" which result in network device instances.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel