[OpenWrt-Devel] About: 18616#comment:15 - Problems still standing :s

Fri Sep 9 15:12:49 EDT 2016

Hello friends.

Excuse me if I can't post it here, it is because of Trac thinks I am a
spammer (abour my mail).

I have the same situation that everyone said in Ticket 18616, also, as
mentioned before, if I power the device up without the wan ethernet cable
plugged, then, when "he" finished booting, it works great.

Eq: Tplink WR740 v6

[   35.058603] ------------[ cut here ]------------

[   35.063426] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:306
dev_watchdog+0x1dc/0x260()

[   35.072155] NETDEV WATCHDOG: eth1 (ag71xx): transmit queue 0 timed out

[   35.078896] Modules linked in: ath9k ath9k_common pppoe ppp_async
l2tp_ppp iptable_nat ath9k_hw ath pptp pppox ppp_mppe ppp_generic
nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT
ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport
xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT
xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4
nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache
nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt
compat ledtrig_usbdev ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common
ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ip_gre gre
l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip_tunnel sha1_generic ecb
ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore
nls_base usb_common aead crypto_null crypto_hash

[   35.161975] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14 #12

[   35.167996] Stack : 803be744 00000000 00000001 80410000 804070d8 80406d63
8039fe60 00000000

[   35.167996]    80473790 804053fc 00000200 00100000 00000100 800a678c
803a54a4 80400000

[   35.167996]    00000003 804053fc 803a38b0 80401c2c 00000100 800a4758
00000006 00000000

[   35.167996]    00000000 801ef700 00000000 00000000 00000000 00000000
00000000 00000000

[   35.167996]    00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000

[   35.167996]    ...

[   35.205018] Call Trace:

[   35.207565] [<8007197c>] show_stack+0x50/0x84

[   35.212085] [<80081580>] warn_slowpath_common+0xa0/0xd0

[   35.217479] [<800815dc>] warn_slowpath_fmt+0x2c/0x38

[   35.222616] [<80280ce8>] dev_watchdog+0x1dc/0x260

[   35.227492] [<800af8a0>] call_timer_fn.isra.5+0x24/0x80

[   35.232900] [<800afb1c>] run_timer_softirq+0x1ac/0x1f4

[   35.238208] [<800839dc>] __do_softirq+0x164/0x290

[   35.243098] [<8006a5d0>] plat_irq_dispatch+0xbc/0xf4

[   35.248224]

[   35.249774] ---[ end trace aea41b79d51c6dee ]---

[   35.254542] eth1: tx timeout

root at OpenWrt:~# ifconfig eth1

eth1      Link encap:Ethernet  HWaddr 18:A6:F7:99:99:01

          inet6 addr: fe80::1aa6:f7ff:fe99:9901/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:367 errors:0 dropped:0 overruns:0 frame:0

          TX packets:18 errors:2 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:61758 (60.3 KiB)  TX bytes:3396 (3.3 KiB)

          Interrupt:4

Is there a patch for this?

Best regards,

Guillermo Nardoni

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160909/ce2b9c8a/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel