[OpenWrt-Devel] BT Home Hub 5 support
openwrt at ezplanet.net
Tue Nov 29 14:06:12 EST 2016
My query relates to Type A which is a Lantiq Atheros chipset.
On 29/11/16 17:58, Dave Taht wrote:
> since broadcom was sold to another company recently is there any sign
> we'll see open drivers for the BCM4360 ?
> On Tue, Nov 29, 2016 at 5:11 AM, Mauro M. <openwrt at ezplanet.net> wrote:
>> From the OpenWrt wiki page: https://wiki.openwrt.org/toh/bt/homehub_v5a
>> I understand that support for BT Home Hub 5 was included in DD trunk.
>> I pulled the latest trunk source 50013 from git, but the image is not built
>> under bin/lantiq as expected.
>> As deducted from the firmware images available on-line
>> (openwrt-lantiq-xrx200-BTHOMEHUBV5A-install-uImage-initramfs) I am using:
>> Target System (Lantiq) --->
>> Subtarget (XRX200) --->
>> Target Profile (Default Profile) --->
>> There is nothing else other than Default Profile. I was expecting to find a
>> specific BTHOMEHUB5 configuration.
>> I run a grep on the code and I found the following:
>> ./target/linux/lantiq/image/Makefile:define LegacyDevice/BTHOMEHUBV5A
>> ./target/linux/lantiq/image/Makefile:LEGACY_DEVICES += BTHOMEHUBV5A
>> ./target/linux/lantiq/dts/BTHOMEHUBV5A.dts: model = "BTHOMEHUBV5A - BT
>> Home Hub 5A";
>> However I am not sure how to activate the build.
>> Please could you help?
>> Thank you in advance,
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel