[OpenWrt-Devel] ATH10K VLAN firmware issue

Bruno Antunes baantunes at gmail.com
Mon Nov 7 07:01:01 EST 2016


On 4 November 2016 at 21:17, Valo, Kalle <kvalo at qca.qualcomm.com> wrote:
> Bruno Antunes <baantunes at gmail.com> writes:
>
>> Old thread but I think the issue is still present.
>>
>> I'm running a setup with VLANs with WDS and ath10k cards.
>>
>> To make it work both cards must be loaded in rawmode, AP
>> and Sta, and with no security.
>>
>> I'm using a OpenWrt trunk r49941 and the most recent firmware,
>> 10.2.4.70.58, from Kalle ath10k firmware tree.
>>
>> Although it works the throughput is very bad.
>> Are there any alternatives to improve the throughput.
>
> Can someone file a bug to bugzilla about this so that all the info is
> properly stored? The more comprehensive the report is the better.
>
> https://bugzilla.kernel.org/

I will file a bug report.

But since it appears to be a firmware related issue
under what category can fill in the bug?

Thanks,
Bruno

>
> --
> Kalle Valo
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list