[OpenWrt-Devel] [PATCH 12/13] ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board

Sven Eckelmann sven.eckelmann at open-mesh.com
Fri May 20 12:03:59 EDT 2016


Signed-off-by: Sven Eckelmann <sven.eckelmann at open-mesh.com>
---
 target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8fc3ab3..f01c6d3 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -72,6 +72,7 @@ case "$FIRMWARE" in
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
 		;;
 	mr1750 | \
+	mr1750v2 | \
 	om5p-acv2)
 		ath10kcal_extract "ART" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-- 
2.8.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list