[OpenWrt-Devel] [PATCH 1/6] [CC] [backport] ar71xx: add GL-AR150 support

alzhao alzhao at gmail.com
Wed May 4 23:02:05 EDT 2016


Backport of changeset 47620, add support of GL-AR150 to cc

Signed-off-by: Alfie Zhao <alzhao at gmail.com>
---
 .../ar71xx/base-files/etc/uci-defaults/01_leds     |   4 +
 .../ar71xx/base-files/etc/uci-defaults/02_network  |   1 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
 .../ar71xx/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ar71xx/config-3.18                    |   1 +
 .../ar71xx/files/arch/mips/ath79/mach-gl-ar150.c   | 125 +++++++++++++++++++++
 target/linux/ar71xx/generic/profiles/gl-connect.mk |  17 ---
 target/linux/ar71xx/generic/profiles/gli.mk        |  27 +++++
 target/linux/ar71xx/image/Makefile                 |   8 ++
 .../patches-3.18/911-MIPS-ath79-add-gl_ar150.patch |  39 +++++++
 10 files changed, 209 insertions(+), 17 deletions(-)
 create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
 delete mode 100644 target/linux/ar71xx/generic/profiles/gl-connect.mk
 create mode 100644 target/linux/ar71xx/generic/profiles/gli.mk
 create mode 100644 target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index a4b355a..0bd0b35 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -181,6 +181,10 @@ dlan-pro-1200-ac)
 	ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
 	;;
 
+gl-ar150)
+	ucidef_set_led_wlan "wlan" "WLAN" "gl_ar150:wlan" "phy0tpt"
+	;;
+
 gl-inet)
 	ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
 	ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index b2e15bb..c7ba875 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -379,6 +379,7 @@ dir-505-a1)
 alfa-ap96 |\
 alfa-nx |\
 ap83 |\
+gl-ar150 |\
 gl-inet |\
 jwap003 |\
 pb42 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index dab4d2c..813ff91 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -458,6 +458,9 @@ ar71xx_board_detect() {
 		name="gl-inet"
 		gl_inet_board_detect
 		;;
+	*"GL-AR150")
+        name="gl-ar150"
+        ;;
 	*"EnGenius EPG5000")
 		name="epg5000"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index d025632..59ee053 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -211,6 +211,7 @@ platform_check_image() {
 	dlan-pro-500-wp | \
 	dlan-pro-1200-ac | \
 	dragino2 | \
+	gl-ar150 | \
 	epg5000 | \
 	esr1750 | \
 	esr900 | \
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index e2ff826..3598a55 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -69,6 +69,7 @@ CONFIG_ATH79_MACH_ESR1750=y
 CONFIG_ATH79_MACH_ESR900=y
 CONFIG_ATH79_MACH_EW_DORIN=y
 CONFIG_ATH79_MACH_F9K1115V2=y
+CONFIG_ATH79_MACH_GL_AR150=y
 CONFIG_ATH79_MACH_GL_INET=y
 CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
 CONFIG_ATH79_MACH_GS_OOLITE=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
new file mode 100644
index 0000000..1e5e6ca
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
@@ -0,0 +1,125 @@
+/*
+ *  GL_ar150 board support
+ *
+ *  Copyright (C) 2011 dongyuqi <729650915 at qq.com>
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2013 alzhao <alzhao at gmail.com>
+ *  Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define GL_AR150_GPIO_LED_WLAN		   0
+#define GL_AR150_GPIO_LED_LAN		   13
+#define GL_AR150_GPIO_LED_WAN		   15 
+
+#define GL_AR150_GPIO_BIN_USB         6
+#define GL_AR150_GPIO_BTN_MANUAL      7
+#define GL_AR150_GPIO_BTN_AUTO	   	   8
+#define GL_AR150_GPIO_BTN_RESET	   11
+
+#define GL_AR150_KEYS_POLL_INTERVAL   20	/* msecs */
+#define GL_AR150_KEYS_DEBOUNCE_INTERVAL	(3 * GL_AR150_KEYS_POLL_INTERVAL)
+
+#define GL_AR150_MAC0_OFFSET	0x0000
+#define GL_AR150_MAC1_OFFSET	0x0000
+#define GL_AR150_CALDATA_OFFSET	0x1000
+#define GL_AR150_WMAC_MAC_OFFSET	0x0000
+
+static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
+	{
+		.name = "gl_ar150:wlan",
+		.gpio = GL_AR150_GPIO_LED_WLAN,
+		.active_low = 0,
+	},
+	{
+		.name = "gl_ar150:lan",
+		.gpio = GL_AR150_GPIO_LED_LAN,
+		.active_low = 0,
+	},
+	{
+		.name = "gl_ar150:wan",
+		.gpio = GL_AR150_GPIO_LED_WAN,
+		.active_low = 0,
+ 		.default_state = 1,
+	},
+};
+
+static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
+	{
+		.desc = "BTN_7",
+		.type = EV_KEY,
+		.code = BTN_7,
+		.debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = GL_AR150_GPIO_BTN_MANUAL,
+		.active_low = 0,
+	},
+	{
+		.desc = "BTN_8",
+		.type = EV_KEY,
+		.code = BTN_8,
+		.debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = GL_AR150_GPIO_BTN_AUTO,
+		.active_low = 0,
+	},
+	{
+		.desc = "reset",
+		.type = EV_KEY,
+		.code = KEY_RESTART,
+		.debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
+		.gpio = GL_AR150_GPIO_BTN_RESET,
+		.active_low = 0,
+	},
+};
+
+static void __init gl_ar150_setup(void)
+{
+
+	/* ART base address */
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	/* register flash. */
+	ath79_register_m25p80(NULL);
+
+	/* register gpio LEDs and keys */
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
+				 gl_ar150_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(gl_ar150_gpio_keys),
+					gl_ar150_gpio_keys);
+
+	/* enable usb */
+	gpio_request_one(GL_AR150_GPIO_BIN_USB,
+				 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+	 			 "USB power");
+	ath79_register_usb();
+	
+	/* register eth0 as WAN, eth1 as LAN */
+	ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
+	ath79_register_mdio(0, 0x0);
+	ath79_register_eth(0);
+	ath79_register_eth(1);
+
+	/* register wireless mac with cal data */
+	ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL-AR150",gl_ar150_setup);
diff --git a/target/linux/ar71xx/generic/profiles/gl-connect.mk b/target/linux/ar71xx/generic/profiles/gl-connect.mk
deleted file mode 100644
index e9377db..0000000
--- a/target/linux/ar71xx/generic/profiles/gl-connect.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/GLINET
-	NAME:=GL.iNet
-	PACKAGES:=kmod-usb-core kmod-usb2
-endef
-
-define Profile/GLINET/Description
-	Package set optimized for the GL-Connect GL.iNet v1.
-endef
-
-$(eval $(call Profile,GLINET))
diff --git a/target/linux/ar71xx/generic/profiles/gli.mk b/target/linux/ar71xx/generic/profiles/gli.mk
new file mode 100644
index 0000000..89b2ead
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/gli.mk
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+define Profile/GLINET
+	NAME:=GL.iNet 6416
+	PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/GLINET/Description
+	Package set optimized for the GL-Connect GL.iNet v1.
+endef
+
+$(eval $(call Profile,GLINET))
+
+define Profile/GL-AR150
+	NAME:=GL-AR150
+	PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/GL-AR150/Description
+	Configuration of GL-AR150.
+endef
+
+$(eval $(call Profile,GL-AR150))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 9a7acbd..fc932e6 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -144,6 +144,14 @@ define Device/weio
 endef
 TARGET_DEVICES += weio
 
+define Device/gl-ar150
+  BOARDNAME = GL-AR150
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += gl-ar150
+
 define Device/wndr3700
   BOARDNAME = WNDR3700
   NETGEAR_KERNEL_MAGIC = 0x33373030
diff --git a/target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch b/target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch
new file mode 100644
index 0000000..31db581
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -533,6 +533,16 @@ config ATH79_MACH_GL_INET
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_GL_AR150
++   bool "GL AR150 support"
++   select SOC_AR933X
++   select ATH79_DEV_ETH
++   select ATH79_DEV_GPIO_BUTTONS
++   select ATH79_DEV_LEDS_GPIO
++   select ATH79_DEV_M25P80
++   select ATH79_DEV_USB
++   select ATH79_DEV_WMAC
++
+ config ATH79_MACH_EAP300V2
+ 	bool "EnGenius EAP300 v2 support"
+ 	select SOC_AR934X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach
+ obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach-epg5000.o
+ obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
+ obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
++obj-$(CONFIG_ATH79_MACH_GL_AR150)	+= mach-gl-ar150.o
+ obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
+ obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -67,6 +67,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
+ 	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
+ 	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
++	ATH79_MACH_GL_AR150,	/* GL-AR150 support */
+ 	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
+ 	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
+ 	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list