[OpenWrt-Devel] Comfast board

Reinoud Koornstra reinoudkoornstra at gmail.com
Mon May 2 20:45:13 EDT 2016

Hi Everyone,

I want to buld openwrt for this cpu: CPU0 revision is: 00019750 (MIPS 74Kc).
Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
Currently I cannot find the correct options for this.
The board that is reported is this: board=COMFAST-CF-WR650AC
It carries this chipset: SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
It reports this switch:

[    0.830000] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0
[    0.920000] libphy: ag71xx_mdio: probed
[    1.520000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00
[uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    1.530000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.120000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII

Any hints as to what to chose to make this happen?

openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list