[OpenWrt-Devel] [PATCH] [CC] ramips: Backport changes to 02_network.

[Vittorio Gambaletta (VittGam)]

The A5-V11 only has one ethernet port, so a VLAN is useless here, now that the
rt3050 TCP bug that happened without VLANs has been fixed for a very long time.

Add this router to the VLAN-less config that is used by other single-port routers.

Also fix MAC address detection code since this router has no WAN port.

Also merge duplicate configuration for the "m2m".

Signed-off-by: Vittorio Gambaletta <openwrt at vittgam.net>
---

--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -37,14 +37,9 @@ ramips_setup_interfaces()
 	ucidef_set_interface_loopback
 
 	case $board in
-	a5-v11)
-		ucidef_set_interface_lan "eth0.1"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_vlan "switch0" "1" "0 6t"
-		;;
-
 	3g150b | \
 	3g300m | \
+	a5-v11 | \
 	linkits7688 | \
 	linkits7688d | \
 	microwrt | \
@@ -57,6 +52,7 @@ ramips_setup_interfaces()
 	dcs-930| \
 	dcs-930l-b1| \
 	ht-tm02| \
+	m2m| \
 	ncs601w | \
 	wnce2001)
 		ucidef_add_switch "switch0" "1" "0"
@@ -72,11 +68,6 @@ ramips_setup_interfaces()
 		ucidef_set_interface_lan "eth0.1"
 		;;
 
-	m2m)
-		ucidef_add_switch "switch0" "4"
-		ucidef_set_interface_lan "eth0"
-		;;
-
 	wizard8800 | \
 	wl-330n | \
 	wmr300)
@@ -315,7 +306,6 @@ ramips_setup_macs()
 		lan_mac=$(macaddr_add "$lan_mac" -2)
 		;;
 
-	a5-v11 |\
 	bc2 |\
 	broadway |\
 	d105 |\
@@ -336,6 +326,7 @@ ramips_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
 
+	a5-v11|\
 	ht-tm02)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		;;
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel