[OpenWrt-Devel] [PATCH] [ar71xx] mach-arduino-yun.c : Arduino Yun board 'WLAN RST' button support

[John Crispin]

Hi,

* do not send us HTML emails. patchwork wont pick them up properly and
they end up being line wrapped/whitespace broken
https://patchwork.ozlabs.org/patch/594794/
* do not use // comments but /* */, i will ask hauke to fix the rest of
the file
* the prefi is wrong. it should be ar71xx:

please fix and resend

	John

On 09/03/2016 01:47, Hirokazu MORIKAWA wrote:
> This patch is a support for Arduino Yun board "WLAN RST" button.
> 
> Signed-off-by: Hirokazu MORIKAWA <morikw2 at gmail.com
> <mailto:morikw2 at gmail.com>>
> ---
>  .../ar71xx/files/arch/mips/ath79/mach-arduino-yun.c | 21
> +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git
> a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
> index d55d542..67a9d18 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
> @@ -60,6 +60,17 @@ static struct gpio_led ds_leds_gpio[] __initdata = {
>  },
>  };
>  
> +static struct gpio_keys_button ds_gpio_keys[] __initdata = {
> +{
> +.desc= "configuration button",
> +.type= EV_KEY,
> +.code= KEY_WPS_BUTTON,
> +.debounce_interval = DS_KEYS_DEBOUNCE_INTERVAL,
> +.gpio= DS_GPIO_CONF_BTN,
> +.active_low= 1,
> +},
> +};
> +
>  static void __init ds_common_setup(void)
>  {
>  static u8 mac[6];
> @@ -97,8 +108,18 @@ static void __init ds_setup(void)
>  
>  ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio),
>  ds_leds_gpio);
> +ath79_register_gpio_keys_polled(-1, DS_KEYS_POLL_INTERVAL,
> +ARRAY_SIZE(ds_gpio_keys),
> +ds_gpio_keys);
>  ath79_register_usb();
>  
> +// use the swtich_led directly form sysfs
> +ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
> +                           AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
> +                           AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
> +   AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
> +                           AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
> +
>  //Disable the Function for some pins to have GPIO functionality active
>  // GPIO6-7-8 and GPIO11
>  ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE |
> AR933X_GPIO_FUNC_I2S_MCK_EN, 0);
> -- 
> 1.9.1
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel