[OpenWrt-Devel] RT5350 board issues.

John Crispin blogic at openwrt.org
Fri Mar 4 04:18:18 EST 2016


On 04/03/2016 10:09, Frédéric Konrad wrote:
> Ping?
> 
> Any idea for this? Or just a clue so I can fix that?
> (I don't have much experience with ralink mips stuff)
> Using a vanilla kernel seems to boot fine BTW..
> 
> Thanks,
> Fred
> 

you are using a kernel that has no dtb. you will need to build a dts
file, compile it and patch it into teh kernel. easiest and probably only
sane way is to add proper support to openwrt and build a kernel

i doubt that vanilla boots properly as vanilla has a rt3050 dts and no 5350.
	John


> On 01/03/2016 12:19, Frederic Konrad wrote:
>> Hi everybody,
>>  
>>  I'm a openwrt newbie and I've some issues running OpenWRT on a RT5350 board.
>>  
>>  I tried "openwrt-15.05-ramips-rt305x-vmlinux.bin" which I transformed in
>>  uImage with:
>>  mkimage -A mips -O linux -T kernel -C none -a 0x80000000 -e 0x80000000 \
>>   -d openwrt-15.05-ramips-rt305x-vmlinux.bin uImage
>>  
>>  But I only get three lines loop when I put that on my target through uboot + tftp:
>>  
>>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>>  [    0.000000] bootconsole [early0] enabled
>>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>>  [    0.000000] bootconsole [early0] enabled
>>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>>  [    0.000000] bootconsole [early0] enabled
>>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>>  [    0.000000] bootconsole [early0] enabled
>>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>>  [    0.000000] bootconsole [early0] enabled
>>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>>  [    0.000000] bootconsole [early0] enabled
>>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>>  
>>  I've the exact same result when I clone the git and compile the whole thing.
>>  
>>  Did I miss something?
>> Thanks,Fred
>>
>>
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list