[OpenWrt-Devel] ar71xx with kernel 4.4 on WZR-HP-AG300H

Andre Valentin avalentin at marcant.net
Sat Jan 30 18:46:09 EST 2016


Hi!

I've got some problems with new 4.4 kernel on ar711 with my WZR-HP-AG300H. Please just take this as a notice, I know it's testing ;-)
If you need more testing, I'm available.

André

Here's the log:

console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init
mtdparts=ar7100-nor0:256k(u-boot),64k(u-boot-env),1152k at 384k(uImage),6592k at 1536k(rootfs),64k at 320k(ART),64k at 8128k(properties),8192k at 8192k(flash1),M
## Booting image at bf060000 ...
   Image Name:   MIPS OpenWrt Linux-4.4
   Created:      2016-01-30  21:45:43 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1402157 Bytes =  1.3 MB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum ... crc32_fw: bf060040 - bf1b656c (len:0015652d) calc...
crc32_fw: range1 bf060040 - bf1b656c
OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

[    0.000000] Linux version 4.4.0 (avalentin at nixdevel.ad.ddimension.net) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48531) ) #1 Sat Jan 30 21:45:32 UTC 2016
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7161 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] No valid device tree found, continuing without
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=WZR-HP-AG300H console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125064K/131072K available (3127K kernel code, 156K rwdata, 648K rodata, 284K init, 213K bss, 6008K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5621354254 ns
[    0.000008] sched_clock: 32 bits at 340MHz, resolution 2ns, wraps every 6316128254ns
[    0.007737] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[    0.070375] pid_max: default: 32768 minimum: 301
[    0.075074] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081595] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089325] Initializing cgroup subsys io
[    0.093284] Initializing cgroup subsys devices
[    0.097666] Initializing cgroup subsys freezer
[    0.102081] Initializing cgroup subsys net_cls
[    0.106505] Initializing cgroup subsys pids
[    0.111981] devtmpfs: initialized
[    0.115925] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.126352] NET: Registered protocol family 16
[    0.131647] MIPS: machine is Buffalo WZR-HP-AG300H/WZR-600DHP
[    2.777559] registering PCI controller with io_map_base unset
[    2.790904] PCI host bridge to bus 0000:00
[    2.794968] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
[    2.801754] pci_bus 0000:00: root bus resource [io  0x0000]
[    2.807306] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    2.814050] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.822006] pci 0000:00:11.0: fixup device configuration
[    2.828688] pci 0000:00:12.0: fixup device configuration
[    2.835385] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
[    2.842075] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
[    2.848856] pci 0000:00:11.0: using irq 40 for pin 1
[    2.853756] pci 0000:00:12.0: using irq 41 for pin 1
[    2.859447] clocksource: Switched to clocksource MIPS
[    2.868345] NET: Registered protocol family 2
[    2.873464] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    2.880397] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    2.886667] TCP: Hash tables configured (established 1024 bind 1024)
[    2.893083] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    2.898830] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    2.905314] NET: Registered protocol family 1
[    2.910501] futex hash table entries: 256 (order: -1, 3072 bytes)
[    2.929097] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.934901] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.946965] io scheduler noop registered
[    2.950859] io scheduler deadline registered (default)
[    2.956647] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
�[    2.987465] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A
[    2.996083] console [ttyS0] enabled
[    2.996083] console [ttyS0] enabled
[    3.002999] bootconsole [early0] disabled
[    3.002999] bootconsole [early0] disabled
[    3.013458] m25p80 spi0.0: found w25q128, expected m25p80
[    3.018861] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    3.026299] m25p80 spi0.1: found w25q128, expected m25p80
[    3.031754] m25p80 spi0.1: w25q128 (16384 Kbytes)
[    3.040647] Concatenating MTD devices:
[    3.044398] (0): "spi0.0"
[    3.047011] (1): "spi0.1"
[    3.049659] into device "flash"
[    3.052803] Creating 5 MTD partitions on "flash":
[    3.057503] 0x000000000000-0x000000040000 : "u-boot"
[    3.065576] switch0: Atheros AR8316 rev. 1 switch registered on ag71xx-mdio.0
[    3.075753] libphy: ag71xx_mdio: probed
[    3.081369] 0x000000040000-0x000000050000 : "u-boot-env"
[    3.088439] 0x000000050000-0x000000060000 : "art"
[    3.094991] 0x000000060000-0x000001ff0000 : "firmware"
[    3.190189] 2 uimage-fw partitions found on MTD device firmware
[    3.196110] 0x000000060000-0x0000001b656d : "kernel"
[    3.202566] 0x0000001b656d-0x000001ff0000 : "rootfs"
[    3.209293] mtd: device 7 (rootfs) set to be root filesystem
[    3.215057] 1 squashfs-split partitions found on MTD device rootfs
[    3.221242] 0x000001790000-0x000001ff0000 : "rootfs_data"
[    3.228451] 0x000001ff0000-0x000002000000 : "user_property"
[    3.400821] ar8316: Using port 4 as switch port
[    3.435260] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316]
[    3.446435] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    3.770815] ar8316: Using port 4 as PHY
[    4.811571] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316]
[    4.822769] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
[    4.830997] NET: Registered protocol family 10
[    4.838214] NET: Registered protocol family 17
[    4.842782] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    4.855482] 8021q: 802.1Q VLAN Support v1.8
[    4.870396] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    4.878306] Freeing unused kernel memory: 284K (80439000 - 80480000)
[    6.978793] init: Console is alive
[    6.982604] init: - watchdog -
[    9.237529] usbcore: registered new interface driver usbfs
[    9.243152] usbcore: registered new interface driver hub
[    9.248523] usbcore: registered new device driver usb
[    9.257859] Button Hotplug driver version 0.4.1
[    9.271478] SCSI subsystem initialized
[    9.280491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.288373] ehci-platform: EHCI generic platform driver
[    9.293719] ehci-platform ehci-platform: EHCI Host Controller
[    9.299503] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    9.307516] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    9.329539] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    9.336696] hub 1-0:1.0: USB hub found
[    9.340792] hub 1-0:1.0: 2 ports detected
[    9.346481] ehci-pci: EHCI PCI platform driver
[    9.355173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.362655] ohci-platform: OHCI generic platform driver
[    9.367951] ohci-platform ohci-platform: Generic Platform OHCI controller
[    9.374810] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[    9.382804] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
[    9.444395] hub 2-0:1.0: USB hub found
[    9.448427] hub 2-0:1.0: 2 ports detected
[    9.454823] uhci_hcd: USB Universal Host Controller Interface driver
[    9.473894] usbcore: registered new interface driver usb-storage
[    9.481150] Error: Driver 'gpio-keys-polled' is already registered, aborting...
4[   10.043002] init: - preinit -

[   10.639997] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.818917] random: procd urandom read with 17 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   11.073781] mount_root: loading kmods from internal overlay
[   11.133098] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[   11.141826] kmodloader: 1 module could not be probed
[   11.147023] kmodloader: - gpio_keys_polled - 0
[   12.258521] jffs2_scan_eraseblock(): End of filesystem marker found at 0x60000
[   12.265787] jffs2_build_filesystem(): unlocking the mtd device... done.
[   12.272407] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   12.670044] eth0: link up (1000Mbps/Full duplex)
[   12.674697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


BUFFALO U-BOOT Ver 1.01
  == CPU:680MHz, DDR:340MHz, AHB:170MHz ==
AP96 (ar7100) U-boot 0.0.1
DRAM:  128 MB
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list