[OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix

[David Hutchison]

Hello John,

Of course this has been over a year since I submitted (
http://patchwork.ozlabs.org/patch/419857/ ); however I remember in one
of our e-mail threads that you ( or Felix? ) thought it was possible
to pull the correct pll_1000 value from the bootloader? Is that still
a possibility?

If you could somehow acquire the correct value directly from the boot
args; that would seem ideal.

-- Davey

On Wed, Jan 27, 2016 at 9:27 AM, John Crispin <blogic at openwrt.org> wrote:
>
>
> On 27/01/2016 17:03, Anton Kalmykov wrote:
>>
>> Hi, 951G owners!
>> I have RB951G-2HnD device with AR9344 rev 3. It is configured like that:
>> - Balanced 2 WAN ports (mwan3)
>> - ipsec LAN-to-LAN
>> - OpenVPN server
>> - about 30 clients (wi-fi, lan)
>>
>> My results for different ath79_eth0_pll_data.pll_1000 values:
>>
>> 0x3e000000 - it worked fine with Barrier Breaker, but sometimes (one or
>> two times per day) it was restarting suddenly. It was happening after I
>> have configured mwan3.
>> 0x06000000 - it works wonderful with Chaos Calmer. The configuration is
>
> so the conensus is that 0x06000000 is correct ?
>
>         John
>
>
>
>> the same. No problem with reboot. So, I would recommend this value.
>> unpatched - of course it doesn't work. :-)
>>
>> If it's useful, please add this information to wiki-page:
>> https://wiki.openwrt.org/toh/mikrotik/rb2011uias#tracking_reported_experience_with_suggested_patch_for_the_5_gige_ports
>>
>>
>> --
>> Anton
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel