[OpenWrt-Devel] [PATCH 06/13] lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sun Jan 17 07:30:11 EST 2016


Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 target/linux/lantiq/dts/FRITZ3370.dts | 71 +++++++++++++++--------------------
 1 file changed, 31 insertions(+), 40 deletions(-)

diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts
index 7344052..c6a593b 100644
--- a/target/linux/lantiq/dts/FRITZ3370.dts
+++ b/target/linux/lantiq/dts/FRITZ3370.dts
@@ -68,7 +68,7 @@
 			state_default: pinmux {
 				spi {
 					lantiq,groups = "spi", "spi_cs4";
-					lantiq,function = "gpio";
+					lantiq,function = "spi";
 				};
 				mdio {
 					lantiq,groups = "mdio";
@@ -173,45 +173,6 @@
 		};
 	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		compatible = "spi-gpio";
-
-		gpio-miso = <&gpio 16 0>;
-		gpio-mosi = <&gpio 17 0>;
-		gpio-sck = <&gpio 18 0>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpio 10 1>;
-
-		m25p80 at 0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "jedec,spi-nor";
-			reg = <0 0>;
-			spi-max-frequency = <1000000>;
-
-			ath9k_cal: partition at 0 {
-				reg = <0x0 0x20000>;
-				label = "urlader";
-				read-only;
-			};
-
-			partition at 20000 {
-				reg = <0x20000 0x10000>;
-				label = "tffs (1)";
-				read-only;
-			};
-
-			partition at 30000 {
-				reg = <0x30000 0x10000>;
-				label = "tffs (2)";
-				read-only;
-			};
-		};
-	};
-
 	ath9k_eep {
 		compatible = "ath9k,eeprom";
 		ath,eep-flash = <&ath9k_cal 0x985>;
@@ -276,3 +237,33 @@
 		};
 	};
 };
+
+&spi {
+	status = "ok";
+
+	m25p80 at 3 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <3 0>;
+		spi-max-frequency = <1000000>;
+
+		ath9k_cal: partition at 0 {
+			reg = <0x0 0x20000>;
+			label = "urlader";
+			read-only;
+		};
+
+		partition at 20000 {
+			reg = <0x20000 0x10000>;
+			label = "tffs (1)";
+			read-only;
+		};
+
+		partition at 30000 {
+			reg = <0x30000 0x10000>;
+			label = "tffs (2)";
+			read-only;
+		};
+	};
+};
-- 
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list