[OpenWrt-Devel] [PATCH 2/3] ar71xx, firmware-utils: split ubdev01 flash layout from XM

[Matthias Schiffer]

The ubdev01 profile defines its own MTDPARTS with smaller firmware
partition, so give it its own UBNT_BOARD in mkfwimage.

Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
 target/linux/ar71xx/image/Makefile   | 2 +-
 tools/firmware-utils/src/mkfwimage.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index cb11104..ca4437b 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1203,7 +1203,7 @@ define Device/ubdev01
   $(Device/ubnt-xm)
   MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
   BOARDNAME := UBNT-UF
-  UBNT_BOARD := XM
+  UBNT_BOARD := UBDEV01
   UBNT_TYPE := XM
   UBNT_CHIP := ar7240
 endef
diff --git a/tools/firmware-utils/src/mkfwimage.c b/tools/firmware-utils/src/mkfwimage.c
index 00bf439..5dae284 100644
--- a/tools/firmware-utils/src/mkfwimage.c
+++ b/tools/firmware-utils/src/mkfwimage.c
@@ -81,6 +81,12 @@ fw_layout_t fw_layout_data[] = {
 		.kern_entry	=	0x80002000,
 		.firmware_max_length=	0x006A0000,
 	},
+	{
+		.name		=	"UBDEV01",
+		.kern_start	=	0x9f050000,
+		.kern_entry	=	0x80002000,
+		.firmware_max_length=	0x006A0000,
+	},
 	{	.name		=	"",
 	},
 };
-- 
2.7.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel