[OpenWrt-Devel] [PATCH 1/1] ramips: fix GPIO names for RT5350F-OLinuXino-EVB

Lorenzo Cafaro lorenzo at ibisco.net
Thu Feb 25 22:46:54 EST 2016


Hi,

the board in subject (RT5350F-OLinuXino-EVB) still ships from vendor
with a RC3 image built upon a .dts file which declares GPIO12 and GPIO14
as relay2 and relay1 respectively, as you can see from their rt5350f
branch on GitHub.

For some reason in the official stable build both the GPIOs are swapped
and the wrong names are declared in the gpio-export directive.

I'm submitting this patch which should roll back the wrong changes, so
that we get backward compatibility with any script developed on RC3
which controls the relays.

After patching correct operation is restored:

root at OpenWrt:/# cat /sys/kernel/debug/gpio
GPIOs 0-21, platform/10000600.gpio, 10000600.gpio:
 gpio-0   (button              ) in  hi
 gpio-12  (relay2              ) out lo
 gpio-14  (relay1              ) out lo

Thank you,

Signed-off-by: Lorenzo Cafaro <lorenzo at ibisco.net>
---
--- trunk/target/linux/ramips/dts/RT5350F-OLINUXINO-EVB.dts.orig	2016-02-26 03:58:43.886340756 +0100
+++ openwrt/target/linux/ramips/dts/RT5350F-OLINUXINO-EVB.dts	2016-02-26 04:22:00.958325054 +0100
@@ -83,15 +83,15 @@
 		#size-cells = <0>;
 
 		relay1 {
-			gpio-export,name = "gpio12";
+			gpio-export,name = "relay1";
 			gpio-export,output = <0>;
-			gpios = <&gpio0 12 0>;
+			gpios = <&gpio0 14 0>;
 		};
 
 		relay2 {
-			gpio-export,name = "gpio14";
+			gpio-export,name = "relay2";
 			gpio-export,output = <0>;
-			gpios = <&gpio0 14 0>;
+			gpios = <&gpio0 12 0>;
 		};
 
 		button {
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list