[OpenWrt-Devel] openwrt: iwinfo: DFS Channels when DFS is not supported/WORLDmode
chaitanya.mgit at gmail.com
Fri Dec 2 16:27:33 EST 2016
On Wed, Nov 30, 2016 at 12:53 AM, Krishna Chaitanya
<chaitanya.mgit at gmail.com> wrote:
> since the commit
> DFS channels are shown in the luci for user to enable independent of
> whether the wifi chipset supports DFS operation in AP/STA modes?
> 1) Should not we check the iface_combinations (through NL80211) and
> accordingly set the restricted flag?
> 2) The patch is somewhat incorrect. It should be, Check for NO_IR, if
> it is set, then that means that AP mode is not allowed, no point in
> checking for RADAR. (country=00, both NO_IR and RADAR are set, but we
> still allow the channel, but 5GHz operation in "beaconing" mode is
> disabled unless we set a country code/regulatory hint is received)
> If we set country code, then NO-IR flag will be cleared, but RADAR
> flag remains so in that case we can make restricted=0.
Adding the original author in CC.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel