[OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.
Piotr Dymacz
pepe2k at gmail.com
Thu Apr 28 08:23:33 EDT 2016
Hello,
2016-04-28 13:12 GMT+02:00 Andrew Yong <me at ndoo.sg>:
[...]
> Many SOM modules and mini routers (and the Zsun card reader
> https://wiki.hackerspace.pl/projects:zsun-wifi-card-reader) don't have
> Ethernet ports and manufacturers ship custom OpenWrt with preconfigured WiFi
> for this, and probably will never be supported by OpenWrt releases because
> of how wifi-detect disables WiFi by default.
Fully agree.
There are other interesting devices, like D-Link DCH-M225 (MT7620A + audio) [1].
I know only one way how to use such devices with OpenWrt: define
hardware button as rfkill and use it after flash.
Cheers,
Piotr
[1] https://wikidevi.com/wiki/D-Link_DCH-M225_rev_A1
>
> On 28 Apr 2016 18:48, "＠SRCHACK.ORG" <tochiro.srchack at gmail.com> wrote:
>>
>> Hi, Dear Piotr.
>>
>> Status quo, is the only way there is access in the UART.
>> Looking for a good way. I'm thinking.
>>
>>
>> On 2016/04/28 19:24, Piotr Dymacz wrote:
>>>
>>> Hello YuheiOKAWA,
>>>
>>> Just small question.
>>> How the user can access the device if it doesn't have Ethernet and the
>>> WiFi is disabled by default in OpenWrt?
>>>
>>> Cheers,
>>> Piotr
>>>
>>>
>>> 2016-04-28 11:49 GMT+02:00 YuheiOKAWA <tochiro.srchack at gmail.com>:
>>>>
>>>> add support for Planex MZK-EX750NP.
>>>> MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater.
>>>> Built-in power supply.
>>>> 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.
>>>>
>>>> Signed-off-by: YuheiOKAWA <tochiro.srchack at gmail.com>
>>>> ---
>>>> target/linux/ramips/base-files/etc/board.d/01_leds | 4 +
>>>> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
>>>> target/linux/ramips/base-files/etc/diag.sh | 3 +-
>>>> target/linux/ramips/base-files/lib/ramips.sh | 3 +
>>>> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
>>>> target/linux/ramips/dts/MZK-EX750NP.dts | 150
>>>> +++++++++++++++++++++
>>>> target/linux/ramips/image/mt7620.mk | 2 +
>>>> target/linux/ramips/mt7620/profiles/planex.mk | 11 ++
>>>> 8 files changed, 174 insertions(+), 1 deletion(-)
>>>> create mode 100644 target/linux/ramips/dts/MZK-EX750NP.dts
>>>>
>>>> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
>>>> b/target/linux/ramips/base-files/etc/board.d/01_leds
>>>> index aeaab33..47e1e6a 100755
>>>> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
>>>> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
>>>> @@ -206,6 +206,10 @@ mr-102n)
>>>> set_wifi_led "$board:green:wlan"
>>>> set_usb_led "$board:green:usb"
>>>> ;;
>>>> +mzk-ex750np)
>>>> + ucidef_set_led_default "power" "power" "$board:red:power" "1"
>>>> + set_wifi_led "$board:red:wifi"
>>>> + ;;
>>>> na930)
>>>> set_usb_led "$board:blue:status"
>>>> ;;
>>>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>>>> b/target/linux/ramips/base-files/etc/board.d/02_network
>>>> index c6c740f..ee690f6 100755
>>>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>>>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>>>> @@ -165,6 +165,7 @@ ramips_setup_interfaces()
>>>> d105|\
>>>> hpm|\
>>>> mzk-ex300np|\
>>>> + mzk-ex750np|\
>>>> na930|\
>>>> wli-tx4-ag300n|\
>>>> wrh-300cr)
>>>> diff --git a/target/linux/ramips/base-files/etc/diag.sh
>>>> b/target/linux/ramips/base-files/etc/diag.sh
>>>> index 20ff8ff..c638d16 100644
>>>> --- a/target/linux/ramips/base-files/etc/diag.sh
>>>> +++ b/target/linux/ramips/base-files/etc/diag.sh
>>>> @@ -41,7 +41,8 @@ get_status_led() {
>>>> hlk-rm04|\
>>>> jhr-n825r|\
>>>> mpr-a1|\
>>>> - mpr-a2)
>>>> + mpr-a2|\
>>>> + mzk-ex750np)
>>>> status_led="$board:red:power"
>>>> ;;
>>>> ai-br100|\
>>>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>>>> b/target/linux/ramips/base-files/lib/ramips.sh
>>>> index 2c669c5..0ac0f68 100755
>>>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>>>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>>>> @@ -298,6 +298,9 @@ ramips_board_detect() {
>>>> *"MZK-EX300NP")
>>>> name="mzk-ex300np"
>>>> ;;
>>>> + *"MZK-EX750NP")
>>>> + name="mzk-ex750np"
>>>> + ;;
>>>> *"MZK-W300NH2"*)
>>>> name="mzk-w300nh2"
>>>> ;;
>>>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>>> index 2b24030..86ea4a3 100755
>>>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>>> @@ -90,6 +90,7 @@ platform_check_image() {
>>>> mzk-750dhp|\
>>>> mzk-dp150n|\
>>>> mzk-ex300np|\
>>>> + mzk-ex750np|\
>>>> mzk-w300nh2|\
>>>> mzk-wdpr|\
>>>> nbg-419n|\
>>>> diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts
>>>> b/target/linux/ramips/dts/MZK-EX750NP.dts
>>>> new file mode 100644
>>>> index 0000000..9b5b418
>>>> --- /dev/null
>>>> +++ b/target/linux/ramips/dts/MZK-EX750NP.dts
>>>> @@ -0,0 +1,150 @@
>>>> +/dts-v1/;
>>>> +
>>>> +/include/ "mt7620a.dtsi"
>>>> +
>>>> +/ {
>>>> + compatible = "ralink,mt7620a-soc";
>>>> + model = "Planex MZK-EX750NP";
>>>> +
>>>> + palmbus at 10000000 {
>>>> + gpio2: gpio at 660 {
>>>> + status = "okay";
>>>> + };
>>>> +
>>>> + gpio3: gpio at 688 {
>>>> + status = "okay";
>>>> + };
>>>> +
>>>> + spi at b00 {
>>>> + status = "okay";
>>>> +
>>>> + m25p80 at 0 {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <1>;
>>>> + compatible = "jedec,spi-nor";
>>>> + reg = <0 0>;
>>>> + linux,modalias = "m25p80", "w25q64";
>>>> + spi-max-frequency = <10000000>;
>>>> +
>>>> + partition at 0 {
>>>> + label = "u-boot";
>>>> + reg = <0x0 0x30000>;
>>>> + read-only;
>>>> + };
>>>> +
>>>> + partition at 30000 {
>>>> + label = "u-boot-env";
>>>> + reg = <0x30000 0x10000>;
>>>> + read-only;
>>>> + };
>>>> +
>>>> + factory: partition at 40000 {
>>>> + label = "factory";
>>>> + reg = <0x40000 0x10000>;
>>>> + read-only;
>>>> + };
>>>> +
>>>> + partition at 50000 {
>>>> + label = "firmware";
>>>> + reg = <0x50000 0x730000>;
>>>> + };
>>>> +
>>>> + partition at 780000 {
>>>> + label = "Udata";
>>>> + reg = <0x780000 0x80000>;
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + pinctrl {
>>>> + state_default: pinctrl0 {
>>>> + gpio {
>>>> + ralink,group = "uartf", "nd_sd",
>>>> "rgmii2", "wled";
>>>> + ralink,function = "gpio";
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + ethernet at 10100000 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&ephy_pins>;
>>>> + mtd-mac-address = <&factory 0x4>;
>>>> + mediatek,portmap = "llllw";
>>>> + };
>>>> +
>>>> + wmac at 10180000 {
>>>> + ralink,mtd-eeprom = <&factory 0>;
>>>> + };
>>>> +
>>>> + pcie at 10140000 {
>>>> + status = "okay";
>>>> +
>>>> + pcie-bridge {
>>>> + mt76 at 0,0 {
>>>> + reg = <0x0000 0 0 0 0>;
>>>> + device_type = "pci";
>>>> + mediatek,mtd-eeprom = <&factory 0x8000>;
>>>> + mediatek,2ghz = <0>;
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + gpio-leds {
>>>> + compatible = "gpio-leds";
>>>> +
>>>> + power {
>>>> + label = "mzk-ex750np:red:power";
>>>> + gpios = <&gpio0 14 1>;
>>>> + };
>>>> +
>>>> + wifi {
>>>> + label = "mzk-ex750np:red:wifi";
>>>> + gpios = <&gpio3 0 1>;
>>>> + };
>>>> +
>>>> + wps {
>>>> + label = "mzk-ex750np:green:wps";
>>>> + gpios = <&gpio0 10 1>;
>>>> + };
>>>> +
>>>> + rep {
>>>> + label = "mzk-ex750np:blue:rep";
>>>> + gpios = <&gpio2 16 1>;
>>>> + };
>>>> +
>>>> + wifi1 {
>>>> + label = "mzk-ex750np:blue:wifi1";
>>>> + gpios = <&gpio2 19 1>;
>>>> + };
>>>> +
>>>> + wifi2 {
>>>> + label = "mzk-ex750np:blue:wifi2";
>>>> + gpios = <&gpio2 18 1>;
>>>> + };
>>>> +
>>>> + wifi3 {
>>>> + label = "mzk-ex750np:blue:wifi3";
>>>> + gpios = <&gpio2 17 1>;
>>>> + };
>>>> + };
>>>> +
>>>> + gpio-keys-polled {
>>>> + compatible = "gpio-keys-polled";
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> + poll-interval = <20>;
>>>> +
>>>> + reset {
>>>> + label = "reset";
>>>> + gpios = <&gpio0 9 1>;
>>>> + linux,code = <0x198>;
>>>> + };
>>>> +
>>>> + wps {
>>>> + label = "wps";
>>>> + gpios = <&gpio0 13 0>;
>>>> + linux,code = <0x211>;
>>>> + };
>>>> + };
>>>> +};
>>>> diff --git a/target/linux/ramips/image/mt7620.mk
>>>> b/target/linux/ramips/image/mt7620.mk
>>>> index 35cb46a..09c0ec2 100644
>>>> --- a/target/linux/ramips/image/mt7620.mk
>>>> +++ b/target/linux/ramips/image/mt7620.mk
>>>> @@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call
>>>> BuildFirmware/CustomFlash/$(1),$(1),na930,NA930
>>>> Image/Build/Profile/DB-WRT01=$(call
>>>> BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
>>>> Image/Build/Profile/MZK-750DHP=$(call
>>>> BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
>>>> Image/Build/Profile/MZK-EX300NP=$(call
>>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP)
>>>> +Image/Build/Profile/MZK-EX750NP=$(call
>>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP)
>>>> Image/Build/Profile/HC5661=$(call
>>>> BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661)
>>>> Image/Build/Profile/HC5761=$(call
>>>> BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
>>>> Image/Build/Profile/HC5861=$(call
>>>> BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
>>>> @@ -149,6 +150,7 @@ define Image/Build/Profile/Default
>>>> $(call Image/Build/Profile/DB-WRT01,$(1))
>>>> $(call Image/Build/Profile/MZK-750DHP,$(1))
>>>> $(call Image/Build/Profile/MZK-EX300NP,$(1))
>>>> + $(call Image/Build/Profile/MZK-EX750NP,$(1))
>>>> $(call Image/Build/Profile/NA930,$(1))
>>>> $(call Image/Build/Profile/HC5661,$(1))
>>>> $(call Image/Build/Profile/HC5761,$(1))
>>>> diff --git a/target/linux/ramips/mt7620/profiles/planex.mk
>>>> b/target/linux/ramips/mt7620/profiles/planex.mk
>>>> index 157cf8d..f461aeb 100644
>>>> --- a/target/linux/ramips/mt7620/profiles/planex.mk
>>>> +++ b/target/linux/ramips/mt7620/profiles/planex.mk
>>>> @@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description
>>>> Package set optimized for the Planex MZK-EX300NP.
>>>> endef
>>>> $(eval $(call Profile,MZK-EX300NP))
>>>> +
>>>> +
>>>> +define Profile/MZK-EX750NP
>>>> + NAME:=Planex MZK-EX750NP
>>>> + PACKAGES:= kmod-mt76 kmod-mt7610e
>>>> +endef
>>>> +
>>>> +define Profile/MZK-EX750NP/Description
>>>> + Package set optimized for the Planex MZK-EX750NP.
>>>> +endef
>>>> +$(eval $(call Profile,MZK-EX750NP))
>>>> --
>>>> 1.9.1
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel at lists.openwrt.org
>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>>
>>
>>
>> --
>> ------------------------------------------------------
>> ＠SRCHACK.ORG
>> tochiro.srchack at gmail.com
>> http://www.srchack.org/
>> ------------------------------------------------------
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list