[OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8
Andrew Yong
me at ndoo.sg
Mon Apr 25 09:32:13 EDT 2016
Stupid question - what calls these files? I assume I have to call my
new function from somewhere.
I'm working on it.
On Mon, Apr 25, 2016 at 9:22 PM, John Crispin <john at phrozen.org> wrote:
>
>
> On 25/04/2016 15:18, Andrew Yong wrote:
>> I have just found out that I need to perform this additional step on
>> this SamKnows Whitebox 8 every boot:
>>
>> /usr/sbin/fw_setenv bootcount 0
>>
>> Where would be an appropriate place to put this? I could add (yet
>> another) init script in ./target/linux/ramips/base-files/etc/init.d
>> with START=99 (this is how SamKnows does it) and add a check
>> against $(ramips_board_name).
>
> look at
> target/linux/ramips/base-files/lib/preinit/04_handle_checksumming and
> add a target/linux/ramips/base-files/lib/preinit/04_handle_bootcount
> using a similar pattern please
>
> John
>
>
>>
>> Without this, SamKnows' custom u-boot will attempt to boot from a backup
>> partition after bootcount exceeds 3 (3 "failed" boots).
>>
>> For an end-user without TTL serial access, it would be a soft brick.
>>
>> I'm cleaning up the rest of the patches, fixed some minor gpio
>> mis-definitions and testing out some wifi fixes before I do a v5.
>>
>
>
>
>> On 25 Apr 2016 20:58, "John Crispin" <john at phrozen.org
>> <mailto:john at phrozen.org>> wrote:
>>
>> Hi,
>>
>> few comments inline. apart from those 2 nitpicks the patch looks good.
>>
>> John
>>
>> On 25/04/2016 03:05, Andrew Yong wrote:
>> > This patch adds support for the SamKnows version 8.0 Whitebox, built
>> > around the MT7621 platform. 2.4GHz appears to be working, albeit
>> > poorly; 5GHz not working yet.
>> >
>> > Fixed in v4:
>> > - I didn't commit some fixes in PATCHv3, that's fixed now
>> > - DTS: Syntax error fixed, LEDs and buttons mapped correctly now
>> > - diag.sh updated to blink WPS LED on boot
>> > - 2.4GHz wifi is working but txpower is stuck at 0, DTS ROM offset
>> > matches SamKnows firmware
>> > - 5GHz wifi not working, DTS pcie1,0 matches SamKnows firmware
>> >
>> > Initial support for SamKnows SK-WB8
>> >
>> > Signed-off-by: Andrew Yong <me at ndoo.sg <mailto:me at ndoo.sg>>
>> >
>> > diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
>> > b/target/linux/ramips/base-files/etc/board.d/01_leds
>> > index e3b8500..df30085 100755
>> > --- a/target/linux/ramips/base-files/etc/board.d/01_leds
>> > +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
>> > @@ -241,6 +241,9 @@ rt-n14u)
>> > set_wifi_led "$board:blue:air"
>> > set_usb_led "$board:blue:usb"
>> > ;;
>> > +sk-wb8)
>> > + set_usb_led "$board:green:usb"
>> > + ;;
>> > tiny-ac)
>> > set_wifi_led "$board:orange:wifi"
>> > set_usb_led "$board:green:usb"
>> > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>> > b/target/linux/ramips/base-files/etc/board.d/02_network
>> > index 3c958ae..3e876d2 100755
>> > --- a/target/linux/ramips/base-files/etc/board.d/02_network
>> > +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>> > @@ -77,6 +77,7 @@ ramips_setup_interfaces()
>> > pbr-m1|\
>> > psg1208|\
>> > sap-g3200u3|\
>> > + sk-wb8|\
>> > wf-2881|\
>> > whr-300hp2|\
>> > whr-600d|\
>> > @@ -310,6 +311,9 @@ ramips_setup_macs()
>> > lan_mac=$(macaddr_setbit_la "$lan_mac")
>> > wan_mac=$(mtd_get_mac_binary factory 32772)
>> > ;;
>> > + sk-wb8)
>> > + wan_mac=$(mtd_get_mac_binary factory 57350)
>> > + ;;
>> > tew-691gr)
>> > lan_mac=$(cat /sys/class/net/eth0/address)
>> > wan_mac=$(macaddr_add "$lan_mac" 3)
>> > diff --git a/target/linux/ramips/base-files/etc/diag.sh
>> > b/target/linux/ramips/base-files/etc/diag.sh
>> > index bd0ff05..a941fca 100644
>> > --- a/target/linux/ramips/base-files/etc/diag.sh
>> > +++ b/target/linux/ramips/base-files/etc/diag.sh
>> > @@ -76,7 +76,8 @@ get_status_led() {
>> > ;;
>> > awapn2403|\
>> > dir-645|\
>> > - wrh-300cr)
>> > + wrh-300cr|\
>> > + sk-wb8)
>>
>> alphabetic ordering please
>>
>> > status_led="$board:green:wps"
>> > ;;
>> > cf-wr800n|\
>> > diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>> > b/target/linux/ramips/base-files/lib/ramips.sh
>> > index 550ec55..4f1bd41 100755
>> > --- a/target/linux/ramips/base-files/lib/ramips.sh
>> > +++ b/target/linux/ramips/base-files/lib/ramips.sh
>> > @@ -370,6 +370,9 @@ ramips_board_detect() {
>> > *"SAP-G3200U3")
>> > name="sap-g3200u3"
>> > ;;
>> > + *"SamKnows Whitebox 8")
>> > + name="sk-wb8"
>> > + ;;
>>
>> alphabetic ordering please
>>
>> > *"SL-R7205"*)
>> > name="sl-r7205"
>> > ;;
>> > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> > b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> > index 73ba6e6..fcc1b79 100755
>> > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> > @@ -109,6 +109,7 @@ platform_check_image() {
>> > rt-n56u|\
>> > rut5xx|\
>> > sap-g3200u3|\
>> > + sk-wb8|\
>> > sl-r7205|\
>> > tew-691gr|\
>> > tew-692gr|\
>> > diff --git a/target/linux/ramips/dts/SK-WB8.dts
>> > b/target/linux/ramips/dts/SK-WB8.dts
>> > new file mode 100644
>> > index 0000000..3292194
>> > --- /dev/null
>> > +++ b/target/linux/ramips/dts/SK-WB8.dts
>> > @@ -0,0 +1,122 @@
>> > +/dts-v1/;
>> > +
>> > +#include "mt7621.dtsi"
>> > +
>> > +/ {
>> > + compatible = "mediatek,mt7621-eval-board",
>> "mediatek,mt7621-soc";
>> > + model = "SamKnows SK-WB8";
>> > +
>> > + memory at 0 {
>> > + device_type = "memory";
>> > + reg = <0x0 0x4000000>;
>> > + };
>> > +
>> > + chosen {
>> > + bootargs = "console=ttyS0,57600";
>> > + };
>> > +
>> > + palmbus at 1E000000 {
>> > + spi at b00 {
>> > + status = "okay";
>> > +
>> > + m25p80 at 0 {
>> > + #address-cells = <1>;
>> > + #size-cells = <1>;
>> > + compatible = "mx25l6405d";
>> > + reg = <0 0>;
>> > + linux,modalias = "m25p80";
>> > + spi-max-frequency = <10000000>;
>> > +
>> > + partition at 0 {
>> > + label = "u-boot";
>> > + reg = <0x0 0x30000>;
>> > + read-only;
>> > + };
>> > +
>> > + partition at 30000 {
>> > + label = "u-boot-env";
>> > + reg = <0x30000 0x10000>;
>> > + read-only;
>> > + };
>> > +
>> > + factory: partition at 40000 {
>> > + label = "factory";
>> > + reg = <0x40000 0x10000>;
>> > + read-only;
>> > + };
>> > +
>> > + partition at 50000 {
>> > + label = "firmware";
>> > + reg = <0x50000 0x7b0000>;
>> > + };
>> > +
>> > + };
>> > + };
>> > + };
>> > +
>> > + pcie at 1e140000 {
>> > + status = "okay";
>> > +
>> > + pcie0 {
>> > + mt76 at 0,0 {
>> > + reg = <0x0000 0 0 0 0>;
>> > + device_type = "pci";
>> > + mediatek,mtd-eeprom = <&factory
>> 0x8000>;
>> > + mediatek,2ghz = <0>;
>> > + };
>> > + };
>> > +
>> > + pcie1 {
>> > + mt76 at 1,0 {
>> > + reg = <0x0000 0 0 0 0>;
>> > + device_type = "pci";
>> > + mediatek,mtd-eeprom = <&factory
>> 0x0000>;
>> > + mediatek,5ghz = <0>;
>> > + };
>> > + };
>> > + };
>> > +
>> > + ethernet at 1e100000 {
>> > + mtd-mac-address = <&factory 0xe000>;
>> > + };
>> > +
>> > + gpio-leds {
>> > + compatible = "gpio-leds";
>> > +
>> > + wps {
>> > + label = "sk-wb8:green:wps";
>> > + gpios = <&gpio1 14 1>;
>> > + };
>> > +
>> > + usb {
>> > + label = "sk-wb8:green:usb";
>> > + gpios = <&gpio1 15 1>;
>> > + };
>> > + };
>> > +
>> > + gpio-keys-polled {
>> > + compatible = "gpio-keys-polled";
>> > + #address-cells = <1>;
>> > + #size-cells = <0>;
>> > + poll-interval = <20>;
>> > + wps {
>> > + label = "wps";
>> > + gpios = <&gpio1 11 1>;
>> > + linux,code = <0x211>;
>> > + };
>> > + reset {
>> > + label = "reset";
>> > + gpios = <&gpio1 9 1>;
>> > + linux,code = <0x198>;
>> > + };
>> > + };
>> > +
>> > + pinctrl {
>> > + state_default: pinctrl0 {
>> > + gpio {
>> > + ralink,group = "i2c", "uart2",
>> > "uart3", "rgmii2", "sdhci";
>> > + ralink,function = "gpio";
>> > + };
>> > + };
>> > + };
>> > +};
>> > diff --git a/target/linux/ramips/image/mt7621.mk <http://mt7621.mk>
>> > b/target/linux/ramips/image/mt7621.mk <http://mt7621.mk>
>> > index 0af9596..3e2f7eb 100644
>> > --- a/target/linux/ramips/image/mt7621.mk <http://mt7621.mk>
>> > +++ b/target/linux/ramips/image/mt7621.mk <http://mt7621.mk>
>> > @@ -132,6 +132,12 @@ define Device/ubnt-erx
>> > endef
>> > TARGET_DEVICES += ubnt-erx
>> >
>> > +define Device/sk-wb8
>> > + DTS := SK-WB8
>> > + IMAGE_SIZE := $(ralink_default_fw_size_16M)
>> > +endef
>> > +TARGET_DEVICES += sk-wb8
>> > +
>> > # FIXME: is this still needed?
>> > define Image/Prepare
>> > #define Build/Compile
>> > diff --git a/target/linux/ramips/mt7621/profiles/sk-wb8.mk
>> <http://sk-wb8.mk>
>> > b/target/linux/ramips/mt7621/profiles/sk-wb8.mk <http://sk-wb8.mk>
>> > new file mode 100644
>> > index 0000000..efa4858
>> > --- /dev/null
>> > +++ b/target/linux/ramips/mt7621/profiles/sk-wb8.mk <http://sk-wb8.mk>
>> > @@ -0,0 +1,18 @@
>> > +#
>> > +# Copyright (C) 2015 OpenWrt.org
>> > +#
>> > +# This is free software, licensed under the GNU General Public
>> License v2.
>> > +# See /LICENSE for more information.
>> > +#
>> > +
>> > +define Profile/SK-WB8
>> > + NAME:=SK-WB8 Profile
>> > + PACKAGES:=\
>> > + kmod-usb-core kmod-usb3 \
>> > + kmod-ledtrig-usbdev
>> > +endef
>> > +
>> > +define Profile/SK-WB8/Description
>> > + Package set optimized for the SamKnows SK-WB8.
>> > +endef
>> > +$(eval $(call Profile,SK-WB8))
>> > _______________________________________________
>> > openwrt-devel mailing list
>> > openwrt-devel at lists.openwrt.org
>> <mailto:openwrt-devel at lists.openwrt.org>
>> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >
>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list