[OpenWrt-Devel] [PATCH 1/3] ramips: Add DTS files for HiWiFi HC5x61 models
Piotr Dymacz
pepe2k at gmail.com
Mon Sep 28 07:25:35 EDT 2015
Hello,
Please, take a look at other dts files in ramips target and follow the
general convention, like:
- use only model name for dts filename
- keep empty lines between nodes and between nodes and properties (ex. [1])
[1] https://dev.openwrt.org/browser/trunk/target/linux/ramips/dts/WIZFI630A.dts#L126
Cheers,
Piotr
2015-09-28 12:45 GMT+02:00 Comman Kang <kangxn at 163.com>:
> HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
>
> The original author is Justin Liu (rssnsj at gmail.com). I ported the patch to trunk and submitted it here with his approval.
>
> Signed-off-by: Xiaoning Kang <kangxn at 163.com>
>
>
>
> diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts b/target/linux/ramips/dts/HiWiFi-HC5661.dts
> new file mode 100644
> index 0000000..f3ca70c
> --- /dev/null
> +++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts
> @@ -0,0 +1,162 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> + compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc";
> + model = "HiWiFi HC5661";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + palmbus at 10000000 {
> + sysc at 0 {
> + ralink,gpiomux = "i2c", "jtag";
> + ralink,uartmux = "gpio";
> + ralink,wdtmux = <1>;
> + };
> + gpio0: gpio at 600 {
> + status = "okay";
> + };
> + gpio2: gpio at 660 {
> + status = "okay";
> + };
> + gpio3: gpio at 688 {
> + status = "okay";
> + };
> +
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q128";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q128";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xf80000>;
> + };
> +
> + partition at fd0000 {
> + label = "hwf_config";
> + reg = <0xfd0000 0x10000>;
> + };
> +
> + bdinfo: partition at fe0000 {
> + label = "bdinfo";
> + reg = <0xfe0000 0x10000>;
> + };
> +
> + partition at ff0000 {
> + label = "backup";
> + reg = <0xff0000 0x10000>;
> + };
> + };
> + };
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + ethernet at 10100000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ephy_pins>;
> + mtd-mac-address = <&factory 0x4>;
> + ralink,port-map = "wllll";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "uartf", "wled", "nd_sd";
> + ralink,function = "gpio";
> + };
> + pa {
> + ralink,group = "pa";
> + ralink,function = "pa";
> + };
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + system {
> + label = "hiwifi-5661:blue:system";
> + gpios = <&gpio0 9 1>;
> + };
> + internet {
> + label = "hiwifi-5661:blue:internet";
> + gpios = <&gpio0 11 1>;
> + };
> + wlan2p4 {
> + label = "hiwifi-5661:blue:wlan-2p4";
> + gpios = <&gpio3 0 1>;
> + };
> + wlan5p {
> + label = "hiwifi-5661:blue:wlan-5p";
> + gpios = <&gpio0 7 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 12 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> + gpio_export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> + usbpower {
> + gpio-export,name = "usbpower";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 13 0>;
> + };
> + };
> +
> +};
> +
> diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts b/target/linux/ramips/dts/HiWiFi-HC5761.dts
> new file mode 100644
> index 0000000..1340751
> --- /dev/null
> +++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts
> @@ -0,0 +1,162 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> + compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc";
> + model = "HiWiFi HC5761";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + palmbus at 10000000 {
> + sysc at 0 {
> + ralink,gpiomux = "i2c", "jtag";
> + ralink,uartmux = "gpio";
> + ralink,wdtmux = <1>;
> + };
> + gpio0: gpio at 600 {
> + status = "okay";
> + };
> + gpio2: gpio at 660 {
> + status = "okay";
> + };
> + gpio3: gpio at 688 {
> + status = "okay";
> + };
> +
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q128";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q128";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xf80000>;
> + };
> +
> + partition at fd0000 {
> + label = "hwf_config";
> + reg = <0xfd0000 0x10000>;
> + };
> +
> + bdinfo: partition at fe0000 {
> + label = "bdinfo";
> + reg = <0xfe0000 0x10000>;
> + };
> +
> + partition at ff0000 {
> + label = "backup";
> + reg = <0xff0000 0x10000>;
> + };
> + };
> + };
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + ethernet at 10100000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ephy_pins>;
> + mtd-mac-address = <&factory 0x4>;
> + ralink,port-map = "wllll";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "uartf", "wled", "nd_sd";
> + ralink,function = "gpio";
> + };
> + pa {
> + ralink,group = "pa";
> + ralink,function = "pa";
> + };
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + system {
> + label = "hiwifi-5761:blue:system";
> + gpios = <&gpio0 9 1>;
> + };
> + internet {
> + label = "hiwifi-5761:blue:internet";
> + gpios = <&gpio0 11 1>;
> + };
> + wlan2p4 {
> + label = "hiwifi-5761:blue:wlan-2p4";
> + gpios = <&gpio3 0 1>;
> + };
> + wlan5p {
> + label = "hiwifi-5761:blue:wlan-5p";
> + gpios = <&gpio0 7 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 12 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> + gpio_export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> + usbpower {
> + gpio-export,name = "usbpower";
> + gpio-export,output = <1>;
> + gpios = <&gpio0 13 0>;
> + };
> + };
> +
> +};
> +
> diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts b/target/linux/ramips/dts/HiWiFi-HC5861.dts
> new file mode 100644
> index 0000000..2d68e69
> --- /dev/null
> +++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts
> @@ -0,0 +1,203 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> + compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc";
> + model = "HiWiFi HC5861";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + palmbus at 10000000 {
> + sysc at 0 {
> + ralink,gpiomux = "i2c", "jtag";
> + ralink,uartmux = "gpio";
> + ralink,wdtmux = <1>;
> + };
> + gpio0: gpio at 600 {
> + status = "okay";
> + };
> + gpio2: gpio at 660 {
> + status = "okay";
> + };
> + gpio3: gpio at 688 {
> + status = "okay";
> + };
> +
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q128";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q128";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xf80000>;
> + };
> +
> + partition at fd0000 {
> + label = "hwf_config";
> + reg = <0xfd0000 0x10000>;
> + };
> +
> + bdinfo: partition at fe0000 {
> + label = "bdinfo";
> + reg = <0xfe0000 0x10000>;
> + };
> +
> + partition at ff0000 {
> + label = "backup";
> + reg = <0xff0000 0x10000>;
> + };
> + };
> + };
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + ethernet at 10100000 {
> + status = "okay";
> + mtd-mac-address = <&factory 0x4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
> +
> + ralink,port-map = "wllll";
> +
> + port at 4 {
> + status = "okay";
> + phy-handle = <&phy4>;
> + phy-mode = "rgmii";
> + };
> +
> + port at 5 {
> + status = "okay";
> + phy-handle = <&phy5>;
> + phy-mode = "rgmii";
> + };
> +
> + mdio-bus {
> + status = "okay";
> +
> + phy4: ethernet-phy at 4 {
> + reg = <4>;
> + phy-mode = "rgmii";
> + };
> +
> + phy5: ethernet-phy at 5 {
> + reg = <5>;
> + phy-mode = "rgmii";
> + };
> + };
> + };
> +
> + gsw at 10110000 {
> + ralink,port4 = "gmac";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "uartf", "wled", "nd_sd";
> + ralink,function = "gpio";
> + };
> + pa {
> + ralink,group = "pa";
> + ralink,function = "pa";
> + };
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + system {
> + label = "hiwifi-5861:blue:system";
> + gpios = <&gpio0 9 1>;
> + };
> + wlan2p4 {
> + label = "hiwifi-5861:blue:wlan-2p4";
> + gpios = <&gpio0 11 1>;
> + };
> + internet {
> + label = "hiwifi-5861:blue:internet";
> + gpios = <&gpio3 0 1>;
> + };
> + wlan5p {
> + label = "hiwifi-5861:blue:wlan-5p";
> + gpios = <&gpio0 7 1>;
> + };
> + turbo {
> + label = "hiwifi-5861:blue:turbo";
> + gpios = <&gpio0 10 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 12 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> + gpio_export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> + usbpower {
> + gpio-export,name = "usbpower";
> + gpio-export,output = <0>;
> + gpios = <&gpio0 13 0>;
> + };
> + sdpower {
> + gpio-export,name = "sdpower";
> + gpio-export,output = <0>;
> + gpios = <&gpio0 8 0>;
> + };
> + };
> +
> +};
> +
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list