[OpenWrt-Devel] [PATCH] base-files: assign proper GPIO pin for Ubiquiti Nanostation models

[John Crispin]

you used the wrong prefix, i fixed it manually, please double check it
next time

	John

On 13/09/2015 00:33, Lars Kruse wrote:
> The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
> following:
> * Ubiquiti Nanostation M XM: Pin 8
> * Ubiquiti Nanostation M XW: Pin 2
> 
> The previous definition of the pins was mixed up between XM and XW model.
> 
> Signed-off-by: Lars Kruse <lists at sumpfralle.de>
> ---
>  target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> index 81d3982..b41f275 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> @@ -10,10 +10,10 @@ board=$(ar71xx_board_name)
>  
>  case "$board" in
>  nanostation-m)
> -	ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
> +	ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8"
>  	;;
>  nanostation-m-xw)
> -	ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8"
> +	ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
>  	;;
>  cpe510)
>  	ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel