[OpenWrt-Devel] my arc needs help
Alexey.Brodkin at synopsys.com
Mon Nov 23 02:31:57 EST 2015
On Sun, 2015-11-22 at 03:33 +0100, dlorahhh at gmail.com wrote:
> i'm currently working on my first arc device
> it's a VAP2404 from Arris or Motorola
> it's given as Liveplug Wifi Livebox Orange VAP2404 by the french Orange ISP
> it's very similar to these :
> VAP2400, Motorola VAP2500
> instead of the others, vap2404 have 4 eth ports
> it's holding these chips :
> 88e6071-nnc2 (marvell)
> MX25L12845EMI-10G (macronix)
> 5ps5162 (?)
> QT2518B (quantenna)
> QT2018BC (quantenna)
> this console shows the OEM firmware booting, if i'm not wrong, on a linux
> os shell.
> is owrt supported? i think so, or soon :
> it's seems to be an ARC processor
> but the remaining question is :
> which image i should use?
> i don't find the right one..
> i little help would be appreciated
As of today the first ARC boards are indeed supported in OpenWRT.
These are nSIM (which is actually a simulated board) and AXS101
So your board is not supported yet.
Moreover since I don't have access to the mentioned board I barely
may add its support in OpenWRT myself. But I'll be happy to help you
with doing a port of OpenWRT for your board.
Please take a look at my most recent patch that adds support of ARC
You may use that as a reference for preparing your port.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel