[OpenWrt-Devel] [PATCH v3] [ramips] mt7621: add support for netis WF-2881‏

YounJae Rho luxflow at live.com
Sun Nov 22 09:58:12 EST 2015


netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs

tested not working
* jffs2 oob erase marker error 
* openwrt setting(luci) reset after reboot

Signed-off-by: YounJae Rho <luxflow at live.com>

---
I tested it in trunk commit 2c868ebd6f1132e19f120774e98253136b1fcc88
MTK_NAND should be patched to compile


 target/linux/ramips/base-files/etc/board.d/01_leds |   3 +-
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 target/linux/ramips/base-files/etc/diag.sh         |   1 +
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/WF-2881.dts                | 123 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   6 +-
 target/linux/ramips/mt7621/config-3.18             |   4 +-
 target/linux/ramips/mt7621/profiles/netis.mk       |  20 ++++
 9 files changed, 159 insertions(+), 3 deletions(-)
 create mode 100644 target/linux/ramips/dts/WF-2881.dts
 create mode 100644 target/linux/ramips/mt7621/profiles/netis.mk

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5627c8c..a365c61 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -44,7 +44,8 @@ air3gii)
 all0239-3g|\
 hw550-3g|\
 mofi3500-3gn|\
-sap-g3200u3)
+sap-g3200u3|\
+wf-2881)
 	set_usb_led "$board:green:usb"
 	;;
 all0256n)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 3821742..45778f3 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -78,6 +78,7 @@ ramips_setup_interfaces()
 	oy-0001|\
 	pbr-m1|\
 	sap-g3200u3|\
+	wf-2881|\
 	whr-300hp2|\
 	whr-600d|\
 	wsr-1166|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 3013d24..ff5fbf2 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -155,6 +155,7 @@ get_status_led() {
 	tew-692gr|\
 	ur-326n4g|\
 	ur-336un|\
+	wf-2881|\
 	wr512-3gn)
 		status_led="$board:green:wps"
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index a1bcb72..eb2f194 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -376,6 +376,9 @@ ramips_board_detect() {
 	*"WCR-150GN")
 		name="wcr-150gn"
 		;;
+	*"WF-2881")
+		name="wf-2881"
+		;;
 	*"WHR-1166D")
 		name="whr-1166d"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0e8d619..19ab5a2 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -108,6 +108,7 @@ platform_check_image() {
 	w150m|\
 	w306r-v20|\
 	w502u|\
+	wf-2881|\
 	whr-1166d|\
 	whr-300hp2|\
 	whr-600d|\
diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts
new file mode 100644
index 0000000..52d04e7
--- /dev/null
+++ b/target/linux/ramips/dts/WF-2881.dts
@@ -0,0 +1,123 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "NETIS WF-2881";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	palmbus at 1E000000 {
+		spi at b00 {
+			status="disabled";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	nand at 1e003000 {
+		compatible = "mtk,mt7621-nand";
+		bank-width = <2>;
+		reg = <0x1e003000 0x800
+				0x1e003800 0x800>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition at 0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition at 30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x1000>;
+			read-only;
+		};
+
+		partition at 80000 {
+			label = "config";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		factory: partition at 100000 {
+			label = "factory";
+			reg = <0x100000 0x40000>;
+			read-only;
+		};
+
+		partition at 140000 {
+			label = "firmware";
+			reg = <0x140000 0x7E00000>;
+		};
+	};
+
+	pcie at 1e140000 {
+		status = "okay";
+
+		pcie0 {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+
+		pcie1 {
+			mt76 at 1,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,5ghz = <0>;
+			};
+		};
+	};
+
+	ethernet at 1e100000 {
+		mtd-mac-address = <&factory 0xe006>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "wf-2881:green:usb";
+			gpios = <&gpio0 6 1>;
+		};
+
+		wps {
+			label = "wf-2881:green:wps";
+			gpios = <&gpio0 0 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "uart3", "jtag";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 5e19c3f..be0347c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -952,7 +952,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881
 endif
 
 define Device/mt7621
@@ -1007,6 +1007,10 @@ define Device/zbt-wg2626
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
+define Device/wf-2881
+  DTS := WF-2881
+endef
+
 #
 # MT7628 Profiles
 #
diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-3.18
index fb05d1e..bf1b3f9 100644
--- a/target/linux/ramips/mt7621/config-3.18
+++ b/target/linux/ramips/mt7621/config-3.18
@@ -117,18 +117,20 @@ CONFIG_MIPS_MT_FPAFF=y
 CONFIG_MIPS_MT_SMP=y
 CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
 # CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MTK_MTD_NAND is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MT7621_WDT=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
 CONFIG_MTD_SPLIT_TRX_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTK_MTD_NAND=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_RALINK=y
diff --git a/target/linux/ramips/mt7621/profiles/netis.mk b/target/linux/ramips/mt7621/profiles/netis.mk
new file mode 100644
index 0000000..a46fc4f
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/netis.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WF-2881
+	NAME:=NETIS WF-2881
+	PACKAGES:=\
+		kmod-usb-core kmod-usb3 kmod-usb-hid \
+		kmod-ledtrig-usbdev
+endef
+
+define Profile/WF-2881/Description
+	Package set compatible with the NETIS WF-2881 board.
+endef
+
+$(eval $(call Profile,WF-2881))
+


2015-11-22 오전 3:12에 John Crispin 이(가) 쓴 글:
> Hi,
> 
> the patch does not apply. is this against trunk or CC ?
> 
> 	John
> 
> On 14/11/2015 15:32, YounJaeRho wrote:
>> netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
>> It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
>> The following patch adds support for this device.
>>
>> Tested and working:
>> * ethernet
>> * both WiFi radios
>> * USB 3.0
>> * buttons (reset button)
>> * ethernet switch and USB diag LEDs
>> * UART
>> * GPIOs
>>
>>
>> Signed-off-by: YounJae Rho <luxflow at live.com>
>> ---
>> Violation of alphabet ordering, indentation, naming, etc from previous version are resolved.
>> Thanks Piotr Dymacz.
>>
>>
>>  target/linux/ramips/base-files/etc/board.d/01_leds |   3 +-
>>  .../linux/ramips/base-files/etc/board.d/02_network |   1 +
>>  target/linux/ramips/base-files/etc/diag.sh         |   1 +
>>  target/linux/ramips/base-files/lib/ramips.sh       |   3 +
>>  .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
>>  target/linux/ramips/dts/WF-2881.dts                | 123 +++++++++++++++++++++
>>  target/linux/ramips/image/Makefile                 |   6 +-
>>  target/linux/ramips/mt7621/config-3.18             |   4 +-
>>  target/linux/ramips/mt7621/profiles/netis.mk       |  18 +++
>>  9 files changed, 157 insertions(+), 3 deletions(-)
>>  create mode 100644 target/linux/ramips/dts/WF-2881.dts
>>  create mode 100644 target/linux/ramips/mt7621/profiles/netis.mk
>>
>> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
>> index c75a993..f9f8e3e 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
>> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
>> @@ -44,7 +44,8 @@ air3gii)
>>  all0239-3g|\
>>  hw550-3g|\
>>  mofi3500-3gn|\
>> -sap-g3200u3)
>> +sap-g3200u3|\
>> +wf-2881)
>>  	set_usb_led "$board:green:usb"
>>  	;;
>>  all0256n)
>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
>> index 0732796..d3f8121 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>> @@ -78,6 +78,7 @@ ramips_setup_interfaces()
>>  	oy-0001|\
>>  	pbr-m1|\
>>  	sap-g3200u3|\
>> +	wf-2881|\
>>  	whr-300hp2|\
>>  	whr-600d|\
>>  	wsr-1166|\
>> diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
>> index 5376759..7d16f2c 100644
>> --- a/target/linux/ramips/base-files/etc/diag.sh
>> +++ b/target/linux/ramips/base-files/etc/diag.sh
>> @@ -150,6 +150,7 @@ get_status_led() {
>>  	tew-692gr|\
>>  	ur-326n4g|\
>>  	ur-336un|\
>> +	wf-2881|\
>>  	wr512-3gn)
>>  		status_led="$board:green:wps"
>>  		;;
>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
>> index 340bc4c..5ee494e 100755
>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>> @@ -373,6 +373,9 @@ ramips_board_detect() {
>>  	*"WCR-150GN")
>>  		name="wcr-150gn"
>>  		;;
>> +	*"WF-2881")
>> +		name="wf-2881"
>> +		;;
>>  	*"WHR-1166D")
>>  		name="whr-1166d"
>>  		;;
>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> index d3d9df3..687642f 100755
>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> @@ -107,6 +107,7 @@ platform_check_image() {
>>  	w150m|\
>>  	w306r-v20|\
>>  	w502u|\
>> +	wf-2881|\
>>  	whr-1166d|\
>>  	whr-300hp2|\
>>  	whr-600d|\
>> diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts
>> new file mode 100644
>> index 0000000..ba4a29b
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/WF-2881.dts
>> @@ -0,0 +1,123 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7621.dtsi"
>> +
>> +/ {
>> +	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
>> +	model = "NETIS WF-2881";
>> +
>> +	memory at 0 {
>> +		device_type = "memory";
>> +		reg = <0x0 0x8000000>;
>> +	};
>> +
>> +	palmbus at 1E000000 {
>> +		spi at b00 {
>> +			status="disabled";
>> +		};
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "console=ttyS0,57600";
>> +	};
>> +
>> +	nand at 1e003000 {
>> +		compatible = "mtk,mt7621-nand";
>> +		bank-width = <2>;
>> +		reg = <0x1e003000 0x800
>> +				0x1e003800 0x800>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +
>> +		partition at 0 {
>> +			label = "u-boot";
>> +			reg = <0x0 0x30000>;
>> +			read-only;
>> +		};
>> +
>> +		partition at 30000 {
>> +			label = "u-boot-env";
>> +			reg = <0x30000 0x1000>;
>> +			read-only;
>> +		};
>> +
>> +		partition at 80000 {
>> +			label = "config";
>> +			reg = <0x80000 0x20000>;
>> +			read-only;
>> +		};
>> +
>> +		factory: partition at 100000 {
>> +			label = "factory";
>> +			reg = <0x100000 0x40000>;
>> +			read-only;
>> +		};
>> +
>> +		partition at 140000 {
>> +			label = "firmware";
>> +			reg = <0x140000 0x6EC0000>;
>> +		};
>> +	};
>> +
>> +	pcie at 1e140000 {
>> +		status = "okay";
>> +
>> +		pcie0 {
>> +			mt76 at 0,0 {
>> +				reg = <0x0000 0 0 0 0>;
>> +				device_type = "pci";
>> +				mediatek,mtd-eeprom = <&factory 0x8000>;
>> +				mediatek,2ghz = <0>;
>> +			};
>> +		};
>> +
>> +		pcie1 {
>> +			mt76 at 1,0 {
>> +				reg = <0x0000 0 0 0 0>;
>> +				device_type = "pci";
>> +				mediatek,mtd-eeprom = <&factory 0x0000>;
>> +				mediatek,5ghz = <0>;
>> +			};
>> +		};
>> +	};
>> +
>> +	ethernet at 1e100000 {
>> +		mtd-mac-address = <&factory 0xe006>;
>> +	};
>> +
>> +	gpio-leds {
>> +		compatible = "gpio-leds";
>> +
>> +		usb {
>> +			label = "wf-2881:green:usb";
>> +			gpios = <&gpio0 6 1>;
>> +		};
>> +
>> +		wps {
>> +			label = "wf-2881:green:wps";
>> +			gpios = <&gpio0 0 1>;
>> +		};
>> +	};
>> +
>> +	gpio-keys-polled {
>> +		compatible = "gpio-keys-polled";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		poll-interval = <20>;
>> +
>> +		reset {
>> +			label = "reset";
>> +			gpios = <&gpio0 12 1>;
>> +			linux,code = <0x198>;
>> +		};
>> +	};
>> +
>> +	pinctrl {
>> +		state_default: pinctrl0 {
>> +			gpio {
>> +				ralink,group = "uart3", "jtag";
>> +				ralink,function = "gpio";
>> +			};
>> +		};
>> +	};
>> +};
>> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
>> index c66409d..060a2a4 100644
>> --- a/target/linux/ramips/image/Makefile
>> +++ b/target/linux/ramips/image/Makefile
>> @@ -950,7 +950,7 @@ endif
>>  #
>>  
>>  ifeq ($(SUBTARGET),mt7621)
>> -  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3
>> +  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 wf-2881
>>  endif
>>  
>>  define Device/mt7621
>> @@ -1000,6 +1000,10 @@ define Device/sap-g3200u3
>>    DTS := SAP-G3200U3
>>  endef
>>  
>> +define Device/wf-2881
>> +  DTS := WF-2881
>> +endef
>> +
>>  #
>>  # MT7628 Profiles
>>  #
>> diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-3.18
>> index fb05d1e..bf1b3f9 100644
>> --- a/target/linux/ramips/mt7621/config-3.18
>> +++ b/target/linux/ramips/mt7621/config-3.18
>> @@ -117,18 +117,20 @@ CONFIG_MIPS_MT_FPAFF=y
>>  CONFIG_MIPS_MT_SMP=y
>>  CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
>>  # CONFIG_MIPS_VPE_LOADER is not set
>> -# CONFIG_MTK_MTD_NAND is not set
>>  CONFIG_MODULES_USE_ELF_REL=y
>>  CONFIG_MT7621_WDT=y
>>  # CONFIG_MTD_CFI_INTELEXT is not set
>>  CONFIG_MTD_CMDLINE_PARTS=y
>>  CONFIG_MTD_M25P80=y
>> +CONFIG_MTD_NAND=y
>> +CONFIG_MTD_NAND_ECC=y
>>  CONFIG_MTD_PHYSMAP=y
>>  CONFIG_MTD_SPI_NOR=y
>>  CONFIG_MTD_SPLIT_FIRMWARE=y
>>  CONFIG_MTD_SPLIT_SEAMA_FW=y
>>  CONFIG_MTD_SPLIT_TRX_FW=y
>>  CONFIG_MTD_SPLIT_UIMAGE_FW=y
>> +CONFIG_MTK_MTD_NAND=y
>>  CONFIG_NEED_DMA_MAP_STATE=y
>>  CONFIG_NET_FLOW_LIMIT=y
>>  CONFIG_NET_RALINK=y
>> diff --git a/target/linux/ramips/mt7621/profiles/netis.mk b/target/linux/ramips/mt7621/profiles/netis.mk
>> new file mode 100644
>> index 0000000..6de40af
>> --- /dev/null
>> +++ b/target/linux/ramips/mt7621/profiles/netis.mk
>> @@ -0,0 +1,18 @@
>> +#
>> +# Copyright (C) 2015 OpenWrt.org
>> +#
>> +# This is free software, licensed under the GNU General Public License v2.
>> +# See /LICENSE for more information.
>> +#
>> +
>> +define Profile/WF-2881
>> +	NAME:=NETIS WF-2881
>> +	PACKAGES:=\
>> +		kmod-usb-core kmod-usb3 kmod-usb-hid \
>> +		kmod-ledtrig-usbdev
>> +endef
>> +
>> +define Profile/WF-2881/Description
>> +	Package set compatible with the NETIS WF-2881 board.
>> +endef
>> +$(eval $(call Profile,WF-2881))
>>
>>  		 	   		  
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list