[OpenWrt-Devel] [PATCH v2] ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC

Matthias Schiffer mschiffer at universe-factory.net
Sun Mar 29 07:26:41 EDT 2015


There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
  the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
  after the zero (which wasn't always visible using busybox tools, but could
  confuse other scripts)

Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.

The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.

The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.

Fixes #18992.

Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
v2:
* Fix explanation in commit message
* Additional simplifications after receiving additional ART dumps
* Add ticket number


 target/linux/ar71xx/base-files/lib/ar71xx.sh | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d2fe6ef..802524c 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -37,16 +37,26 @@ wndr3700_board_detect() {
 		machine="NETGEAR WNDR3700"
 		;;
 	"33373031")
-		local model
-		model=$(ar71xx_get_mtd_offset_size_format art 56 10 %c)
-		if [ -z "$model" ] || [ "$model" = $'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' ]; then
-			machine="NETGEAR WNDR3700v2"
-		elif [ -z "$model" ] || [ "$model" = $'\xff\xff\xff\xff\xff\xff\xff\xff\xffN' ]; then
-			machine="NETGEAR WNDRMAC"
-		else
+		# Use awk to remove everything after the first zero byte
+		model="$(ar71xx_get_mtd_offset_size_format art 41 32 %c | awk 'BEGIN{FS="[[:cntrl:]]"} {print $1; exit}')"
+		case $model in
+		$'\xff'*)
+			if [ "${model:24:1}" = 'N' ]; then
+				machine="NETGEAR WNDRMAC"
+			else
+				machine="NETGEAR WNDR3700v2"
+			fi
+			;;
+		'29763654+16+64'*)
+			machine="NETGEAR ${model:14}"
+			;;
+		'29763654+16+128'*)
+			machine="NETGEAR ${model:15}"
+			;;
+		*)
+			# Unknown ID
 			machine="NETGEAR $model"
-		fi
-		;;
+		esac
 	esac
 
 	AR71XX_BOARD_NAME="$name"
-- 
2.3.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list