[OpenWrt-Devel] [PATCH] brcm63xx: Add BT Home Hub 2A support.
dani
dgcbueu at gmail.com
Fri Mar 20 13:45:21 EDT 2015
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali at gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu at gmail.com>
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 928c02b..03d98b9 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -72,6 +72,10 @@ set_state() {
fast2704v2)
status_led="F at ST2704V2:green:power"
;;
+ homehub2a)
+ status_led="HOMEHUB2A:green:upgrading"
+ status_led2="HOMEHUB2A:blue:upgrading"
+ ;;
gw6200)
status_led="GW6200:green:line1"
status_led2="GW6200:green:tel"
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index c9bf2f4..58404a1 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -34,6 +34,12 @@ hg556a_*)
ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
;;
+homehub2a)
+ ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
+ ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
+ ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
+ ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
+ ;;
esac
ucidef_commit_leds
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index df4e293..814e100 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -66,7 +66,8 @@ v2500v_bb)
dsl-274xb-c |\
hg553 |\
-hg556a_*)
+hg556a_* |\
+homehub2a)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 2c18762..9c8a612 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -60,6 +60,9 @@ brcm63xx_dt_detect() {
"Broadcom BCM96368MVWG reference board")
board_name="bcm96368mvwg"
;;
+ "BT Home Hub 2.0 Type A")
+ board_name="homehub2a"
+ ;;
"BT Voyager V2500V")
board_name="v2500v"
;;
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 3fb9b1c..662b779 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -258,6 +258,8 @@ $(eval $(call ImageDTB,CFEDTB,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x
$(eval $(call ImageDTB,CFEDTB,AR1004G,AR1004G,ar1004g,96348GW-10,6348))
# Belkin F5D7633
$(eval $(call ImageDTB,CFEDTB,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000))
+# BT Home Hub 2.0 A
+$(eval $(call ImageDTB,CFEDTB,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000))
# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
$(eval $(call ImageDTB,CFEDTB,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5))
# Comtrend AR-5381u
diff --git a/target/linux/brcm63xx/profiles/bt.mk b/target/linux/brcm63xx/profiles/bt.mk
index 0863752..3ca8fe1 100644
--- a/target/linux/brcm63xx/profiles/bt.mk
+++ b/target/linux/brcm63xx/profiles/bt.mk
@@ -5,6 +5,16 @@
# See /LICENSE for more information.
#
+define Profile/BTHOMEHUB2A
+ NAME:=BT Home Hub 2A
+ PACKAGES:=kmod-b43 wpad-mini \
+ kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
+endef
+define Profile/BTHOMEHUB2A/Description
+ Package set optimized for BTHOMEHUB2A.
+endef
+$(eval $(call Profile,BTHOMEHUB2A))
+
define Profile/BTV2500V
NAME:=BT Voyager V2500V
PACKAGES:=kmod-b43 wpad-mini
diff --git a/target/linux/brcm63xx/dts/homehub2a.dts b/target/linux/brcm63xx/dts/homehub2a.dts
new file mode 100644
index 0000000..28de528
--- /dev/null
+++ b/target/linux/brcm63xx/dts/homehub2a.dts
@@ -0,0 +1,140 @@
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+ model = "BT Home Hub 2.0 Type A";
+ compatible = "thomson,homehub2a", "brcm,bcm6358";
+
+ spi-gpio {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-gpio";
+
+ gpio-mosi = <&gpio0 7 0>;
+ gpio-sck = <&gpio0 6 0>;
+ cs-gpios = <&gpio0 5 0>;
+ num-chipselects = <1>;
+
+ hc595: gpio-spi-controller at 0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ phone {
+ label = "phone";
+ gpios = <&gpio0 1 1>;
+ linux,code = <169>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 1>;
+ linux,code = <0x198>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 11 1>;
+ linux,code = <0x211>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_red {
+ label = "HOMEHUB2A:red:power";
+ gpios = <&hc595 0 1>;
+ };
+ power_green {
+ label = "HOMEHUB2A:green:power";
+ gpios = <&hc595 1 1>;
+ default-state = "on";
+ };
+ power_blue {
+ label = "HOMEHUB2A:blue:power";
+ gpios = <&hc595 2 1>;
+ };
+ broadband_red {
+ label = "HOMEHUB2A:red:broadband";
+ gpios = <&hc595 3 1>;
+ };
+ broadband_green {
+ label = "HOMEHUB2A:green:broadband";
+ gpios = <&hc595 4 1>;
+ };
+ broadband_blue {
+ label = "HOMEHUB2A:blue:broadband";
+ gpios = <&hc595 5 1>;
+ };
+ wireless_red {
+ label = "HOMEHUB2A:red:wireless";
+ gpios = <&hc595 6 1>;
+ };
+ wireless_green {
+ label = "HOMEHUB2A:green:wireless";
+ gpios = <&hc595 7 1>;
+ };
+ wireless_blue {
+ label = "HOMEHUB2A:blue:wireless";
+ gpios = <&hc595 8 1>;
+ };
+ phone_red {
+ label = "HOMEHUB2A:red:phone";
+ gpios = <&hc595 9 1>;
+ };
+ phone_green {
+ label = "HOMEHUB2A:green:phone";
+ gpios = <&hc595 10 1>;
+ };
+ phone_blue {
+ label = "HOMEHUB2A:blue:phone";
+ gpios = <&hc595 11 1>;
+ };
+ upgrading_red {
+ label = "HOMEHUB2A:red:upgrading";
+ gpios = <&hc595 12 1>;
+ };
+ upgrading_green {
+ label = "HOMEHUB2A:green:upgrading";
+ gpios = <&hc595 13 1>;
+ };
+ upgrading_blue {
+ label = "HOMEHUB2A:blue:upgrading";
+ gpios = <&hc595 14 1>;
+ };
+ };
+};
+
+&pflash {
+ status = "ok";
+
+ linux,part-probe = "bcm63xxpart";
+
+ cfe at 0 {
+ label = "CFE";
+ reg = <0x000000 0x020000>;
+ };
+
+ linux at 20000 {
+ label = "linux";
+ reg = <0x020000 0xfc0000>;
+ };
+
+ nvram at fe0000 {
+ label = "nvram";
+ reg = <0xfe0000 0x020000>;
+ };
+};
diff --git a/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch b/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch
new file mode 100644
index 0000000..2f3a02a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1748,6 +1748,32 @@
+ },
+ };
+
++static struct board_info __initdata board_homehub2a = {
++ .name = "HOMEHUB2A",
++ .expected_cpu_id = 0x6358,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .fallback_sprom = {
++ .type = SPROM_BCM4322,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
+ static struct board_info __initdata board_HW520 = {
+ .name = "HW6358GW_B",
+ .expected_cpu_id = 0x6358,
+@@ -2748,6 +2774,7 @@
+ &board_nb4_ser_r0,
+ &board_nb4_fxc_r1,
+ &board_ct6373_1,
++ &board_homehub2a,
+ &board_HW520,
+ &board_HW553,
+ &board_HW556_A,
+@@ -2845,6 +2872,7 @@
+ { .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, },
+ { .compatible = "t-com,spw303v", .data = &board_spw303v, },
+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
++ { .compatible = "thomson,homehub2a", .data = &board_homehub2a, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6362
+ { .compatible = "sagem,f at st2504n", .data = &board_fast2504n, },
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list