[OpenWrt-Devel] [PATCH V2] b53: define registers available and needed on BCM5301X

Rafał Miłecki zajec5 at gmail.com
Wed Mar 18 15:06:30 EDT 2015


They are also present on some BCM63xx switches.

Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
 .../generic/files/drivers/net/phy/b53/b53_regs.h   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
index 4899cc4..a393cfa 100644
--- a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
+++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
@@ -50,6 +50,9 @@
 /* Jumbo Frame Registers */
 #define B53_JUMBO_PAGE			0x40
 
+/* CFP Configuration Registers Page */
+#define B53_CFP_PAGE			0xa1
+
 /*************************************************************************
  * Control Page registers
  *************************************************************************/
@@ -99,6 +102,20 @@
 #define B53_MC_FLOOD_MASK		0x34
 #define B53_IPMC_FLOOD_MASK		0x36
 
+/* Overriding ports 0-5 and 7 on devices with xMII interfaces (8 bit) */
+/* For port 8 still use B53_PORT_OVERRIDE_CTRL */
+#define B53_GMII_PORT_OVERRIDE_CTRL(i)	(0x58 + i)
+#define   GMII_PORT_OVERRIDE_LINK		BIT(0)
+#define   GMII_PORT_OVERRIDE_FULL_DUPLEX	BIT(1) /* 0 = Half Duplex */
+#define   GMII_PORT_OVERRIDE_SPEED_S		2
+#define   GMII_PORT_OVERRIDE_SPEED_10M		(0 << PORT_OVERRIDE_SPEED_S)
+#define   GMII_PORT_OVERRIDE_SPEED_100M		(1 << PORT_OVERRIDE_SPEED_S)
+#define   GMII_PORT_OVERRIDE_SPEED_1000M	(2 << PORT_OVERRIDE_SPEED_S)
+#define   GMII_PORT_OVERRIDE_RX_FLOW		BIT(4)
+#define   GMII_PORT_OVERRIDE_TX_FLOW		BIT(5)
+#define   GMII_PORT_OVERRIDE_EN			BIT(6) /* Use the register contents */
+#define   GMII_PORT_OVERRIDE_SPEED_2000M	BIT(7) /* BCM5301X only, requires setting 1000M */
+
 /* Software reset register (8 bit) */
 #define B53_SOFTRESET			0x79
 
@@ -156,6 +173,9 @@
 #define   GC_FRM_MGMT_PORT_04		0x00
 #define   GC_FRM_MGMT_PORT_MII		0x80
 
+#define B53_BRCM_HDR			0x03
+#define   BRCM_HDR_EN			BIT(0)
+
 /* Device ID register (8 or 32 bit) */
 #define B53_DEVICE_ID			0x30
 
@@ -310,4 +330,11 @@
 #define   JMS_MIN_SIZE			1518
 #define   JMS_MAX_SIZE			9724
 
+/*************************************************************************
+ * CFP Configuration Page Registers
+ *************************************************************************/
+
+/* CFP Control Register with ports map (8 bit) */
+#define B53_CFP_CTRL			0x00
+
 #endif /* !__B53_REGS_H */
-- 
1.8.4.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list