[OpenWrt-Devel] [PATCH] [kernel] wnr2200 gpio

John Crispin blogic at openwrt.org
Wed Mar 11 11:25:05 EDT 2015


Hi,

On 11/03/2015 13:40, mar wrote:
> Hi
> 
> I tested this and it works with my wnr2200
> 
> Apply fixed gpio from Ticket https://dev.openwrt.org/ticket/15267
> 
> I checkout the latest thruk
> 

the Signed-off-by: line is missing. please add it with your full name
and resend the patch

Thanks,
	John


> 
> 
>  .../ar71xx/files/arch/mips/ath79/mach-wnr2200.c    | 94 ++++++++++------------
>  1 file changed, 44 insertions(+), 50 deletions(-)
> 
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
> index bf7f9ee..ae8172d 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
> @@ -1,4 +1,4 @@
> -/*
> +/* 
>   *  NETGEAR WNR2200 board support
>   *
>   *  Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com>
> @@ -14,7 +14,9 @@
>  #include <linux/mtd/partitions.h>
> 
>  #include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> 
> +#include "common.h"
>  #include "dev-ap9x-pci.h"
>  #include "dev-eth.h"
>  #include "dev-gpio-buttons.h"
> @@ -23,35 +25,45 @@
>  #include "dev-usb.h"
>  #include "machtypes.h"
> 
> -#define WNR2200_GPIO_LED_LAN2_AMBER    0
> -#define WNR2200_GPIO_LED_LAN4_AMBER    1
> -#define WNR2200_GPIO_LED_WPS           5
> -#define WNR2200_GPIO_LED_WAN_GREEN     7
> -#define WNR2200_GPIO_LED_USB           8
> -#define WNR2200_GPIO_LED_LAN3_AMBER    11
> -#define WNR2200_GPIO_LED_WAN_AMBER     12
> -#define WNR2200_GPIO_LED_LAN1_GREEN    13
> -#define WNR2200_GPIO_LED_LAN2_GREEN    14
> -#define WNR2200_GPIO_LED_LAN3_GREEN    15
> -#define WNR2200_GPIO_LED_LAN4_GREEN    16
> -#define WNR2200_GPIO_LED_PWR_AMBER     21
> -#define WNR2200_GPIO_LED_PWR_GREEN     22
> -
> -#define WNR2200_GPIO_USB_POWER         24
> -
> -#define WNR2200_KEYS_POLL_INTERVAL     20 /* msecs */
> -#define WNR2200_KEYS_DEBOUNCE_INTERVAL (3 * WNR2200_KEYS_POLL_INTERVAL)
> -
> -#define WNR2200_MAC0_OFFSET            0
> -#define WNR2200_MAC1_OFFSET            6
> -#define WNR2200_PCIE_CALDATA_OFFSET    0x1000
> +// AR9287 GPIO LED
> +#define WNR2200_GPIO_LED_WLAN          0
> +#define WNR2200_GPIO_LED_PWR_AMBER     1
> +#define WNR2200_GPIO_LED_PWR_GREEN     2
> +#define WNR2200_GPIO_USB_5V            4
> +
> +// AR9287 GPIO BUTTON
> +#define WNR2200_GPIO_BUTTON_WIFI       3
> +#define WNR2200_GPIO_BUTTON_WPS        5
> +#define WNR2200_GPIO_BUTTON_RESET      6
> +
> +// AR7241
> +#define WNR2200_GPIO_LED_WPS           7
> +#define WNR2200_GPIO_LED_USB           8
> +
> +#define WNR2200_GPIO_LED_LAN1_AMBER    6
> +#define WNR2200_GPIO_LED_LAN2_AMBER    0
> +#define WNR2200_GPIO_LED_LAN3_AMBER    11
> +#define WNR2200_GPIO_LED_LAN4_AMBER    1
> +#define WNR2200_GPIO_LED_WAN_AMBER     12
> +
> +#define WNR2200_MAC0_OFFSET            0
> +#define WNR2200_MAC1_OFFSET            6
> +#define WNR2200_PCIE_CALDATA_OFFSET    0x1000
> 
>  static struct gpio_led wnr2200_leds_gpio[] __initdata = {
>         {
> +               .name           = "netgear:amber:lan1",
> +               .gpio           = WNR2200_GPIO_LED_LAN1_AMBER,
> +               .active_low     = 1,
> +       }, {
>                 .name           = "netgear:amber:lan2",
>                 .gpio           = WNR2200_GPIO_LED_LAN2_AMBER,
>                 .active_low     = 1,
>         }, {
> +               .name           = "netgear:amber:lan3",
> +               .gpio           = WNR2200_GPIO_LED_LAN3_AMBER,
> +               .active_low     = 1,
> +       }, {
>                 .name           = "netgear:amber:lan4",
>                 .gpio           = WNR2200_GPIO_LED_LAN4_AMBER,
>                 .active_low     = 1,
> @@ -60,38 +72,14 @@ static struct gpio_led wnr2200_leds_gpio[] __initdata = {
>                 .gpio           = WNR2200_GPIO_LED_WPS,
>                 .active_low     = 1,
>         }, {
> -               .name           = "netgear:green:wan",
> -               .gpio           = WNR2200_GPIO_LED_WAN_GREEN,
> -               .active_low     = 1,
> -       }, {
>                 .name           = "netgear:green:usb",
>                 .gpio           = WNR2200_GPIO_LED_USB,
>                 .active_low     = 1,
>         }, {
> -               .name           = "netgear:amber:lan3",
> -               .gpio           = WNR2200_GPIO_LED_LAN3_AMBER,
> -               .active_low     = 1,
> -       }, {
>                 .name           = "netgear:amber:wan",
>                 .gpio           = WNR2200_GPIO_LED_WAN_AMBER,
>                 .active_low     = 1,
>         }, {
> -               .name           = "netgear:green:lan1",
> -               .gpio           = WNR2200_GPIO_LED_LAN1_GREEN,
> -               .active_low     = 1,
> -       }, {
> -               .name           = "netgear:green:lan2",
> -               .gpio           = WNR2200_GPIO_LED_LAN2_GREEN,
> -               .active_low     = 1,
> -       }, {
> -               .name           = "netgear:green:lan3",
> -               .gpio           = WNR2200_GPIO_LED_LAN3_GREEN,
> -               .active_low     = 1,
> -       }, {
> -               .name           = "netgear:green:lan4",
> -               .gpio           = WNR2200_GPIO_LED_LAN4_GREEN,
> -               .active_low     = 1,
> -       }, {
>                 .name           = "netgear:amber:power",
>                 .gpio           = WNR2200_GPIO_LED_PWR_AMBER,
>                 .active_low     = 1,
> @@ -106,6 +94,9 @@ static void __init wnr2200_setup(void)
>  {
>         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> 
> +        // Disable JTAG to use all AR7241 gpio leds.
> +        ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, 0);
> +
>         ath79_register_mdio(0, 0x0);
> 
>         ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2200_MAC0_OFFSET, 0);
> @@ -123,13 +114,16 @@ static void __init wnr2200_setup(void)
>         ath79_register_m25p80(NULL);
>         ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, NULL);
> 
> +        ap9x_pci_setup_wmac_led_pin(0, WNR2200_GPIO_LED_WLAN);
> +
>         ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
>                                         wnr2200_leds_gpio);
> 
>         /* enable power for the USB port */
> -       gpio_request_one(WNR2200_GPIO_USB_POWER,
> -                       GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
> -                       "USB power");
> +        ap9x_pci_setup_wmac_gpio(0,
> +            BIT(WNR2200_GPIO_USB_5V) |
> +            BIT(WNR2200_GPIO_LED_PWR_AMBER) | BIT(WNR2200_GPIO_LED_PWR_GREEN),
> +            BIT(WNR2200_GPIO_USB_5V) | BIT(WNR2200_GPIO_LED_PWR_AMBER));
> 
>         ath79_register_usb();
>  }
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list