[OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.

Daniel Petre daniel.petre at posteo.net
Tue Jul 14 15:43:36 EDT 2015


On 06/28/2015 09:16 PM, N.Leiten wrote:
> Hi.
> 
> There's some general problem in hostapd configuration for several devices was observed. In vanilla trunk versions of openwrt I got nearly 40-45Mbit/s speed on Ralink RT5350 based devices and Atheros AR71xx platform (tp-link wr841nd). The problem was in /var/run/hostapd-phy0.conf. It seems it is not enough just set 'wmm_enable=1' to actually enable WME/WMM on interface, it also need all WMM related keys be set. So I just added it with standart definitions from hostapd.conf to /lib/netifd/hostapd.sh.
> 
> As a result I got full 100Mbit/s on AR71XX platform and 70-80Mbit on Ralink. I think it is good performance improvement at this moment.
> 

Hi, this does not seem to make any difference in CC with a tp-link wdr3600..

> Patch was created against current trunk version.
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list