[OpenWrt-Devel] [PATCH 2/2] mvebu: undo LA bit on WRT1900ACv1 WAN MAC address

Claudio Leite leitec at staticky.com
Mon Jul 6 18:06:42 EDT 2015

This had been set in r44508 as a workaround for switch

Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec at staticky.com>
 target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 7217e93..9fc8d9a 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -11,9 +11,8 @@ preinit_set_mac_address() {
 	case $(mvebu_board_name) in
 		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		mac_wan=$(macaddr_setbit_la "$mac")
 		ifconfig eth0 hw ether $mac 2>/dev/null
-		ifconfig eth1 hw ether $mac_wan 2>/dev/null
+		ifconfig eth1 hw ether $mac 2>/dev/null
 		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list