[OpenWrt-Devel] [PATCH 1/3] kirkwood: drop port-based VLAN setup

Claudio Leite leitec at staticky.com
Fri Jan 23 20:27:42 EST 2015


Using port-based VLANs depends on a non-standard
swconfig parameter, which compilcates things like
LuCI that don't know about it. This patch changes
the default to use 802.1q VLANs internally in the
switch, but without tagging packets since we have
two Ethernet ports.

iperf3 tests indicate no difference in performance
versus port-based VLANs when the CPU port is not
using tags.

Signed-off-by: Claudio Leite <leitec at staticky.com>
---
 .../base-files/etc/uci-defaults/02_network         | 25 ++++++----------------
 1 file changed, 6 insertions(+), 19 deletions(-)

diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
index 994d7e8..540c8c3 100644
--- a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
@@ -20,19 +20,6 @@ set network.lan6.reqprefix='no'
 EOF
 }
 
-add_port_based_vlan() {
-	local device=$1
-	local vlan=$2
-	local ports=$3
-	uci batch <<EOF
-add network switch_vlan
-set network. at switch_vlan[-1].device='$device'
-set network. at switch_vlan[-1].vlan='$vlan'
-set network. at switch_vlan[-1].ports='$ports'
-set network. at switch_vlan[-1].port_based='1'
-EOF
-}
-
 . /lib/functions/uci-defaults.sh
 . /lib/kirkwood.sh
 
@@ -55,15 +42,15 @@ case "$board" in
 	;;
 "ea3500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" "1" "0"
-	add_port_based_vlan "switch0" "1" "0 1 2 3 5"
-	add_port_based_vlan "switch0" "2" "4 6"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5"
+	ucidef_add_switch_vlan "switch0" "2" "4 6"
 	;;
 "ea4500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
-	ucidef_add_switch "switch0" "1" "0"
-	add_port_based_vlan "switch0" "1" "0 1 2 3 5"
-	add_port_based_vlan "switch0" "2" "4 6"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5"
+	ucidef_add_switch_vlan "switch0" "2" "4 6"
 	;;
 "guruplug-server-plus")
 	set_lan_dhcp "eth0" "eth1"
-- 
2.3.0.rc1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list